Android to Apple: How To Transfer Photos From Tecno Phantom V Flip to iPad Easily

If you are an Android user and have recently switched to an iPad, you might be wondering how to transfer photos from Tecno Phantom V Flip to iPad. It is a common question that many people ask when they switch from one device to another. Fortunately, there are several ways to transfer photos from Tecno Phantom V Flip to iPad easily. In this article, we will show you how to do it using different methods.

We are living in a world where capturing memories is at our fingertips, and the need to share photos across different devices is more prevalent than ever. Whether you’re looking to share your photos with friends or ensure a secure backup, transferring photos from your Android to your iPad shouldn’t be a hassle.

This article is your ultimate guide to executing photo transfer with no problems. We’ll walk you through the process of how to transfer photos from Tecno Phantom V Flip to iPad as well as iPhone, highlight common mistakes to avoid, and make sure your cherished moments are transferred seamlessly.

Part 1. How Can I Transfer Photos From Tecno Phantom V Flip to iPad Directly?

For a straightforward photo transfer from Tecno Phantom V Flip to iPad, Apple’s Move to iOS app can be an excellent choice. It’s important to note, though, that your iPad must be in setup mode for this method to work. If it’s not in setup mode, you’ll need to perform a reset on your iPad before proceeding with the transfer.

How can I transfer photos from Tecno Phantom V Flip to iPad? Follow the steps below.

Step 1: Set Up Your iPad.

As you set up your iPad, reach the “Apps & Data” screen and select “Move Data from Android.”

Step 2: Install and launch Move to iOS on your Tecno Phantom V Flip.

Install Move to iOS and open the app on your Android. Review the terms and conditions and press “Agree” to proceed.

Step 3: Enter the code.

A six to ten-digit code will be displayed on your iPad screen. Enter this code when prompted on your Tecno Phantom V Flip.

Step 4: Select photos to transfer.

In the Move to iOS app, choose “Photos” to transfer your images. Then, tap “Continue” to initiate the transfer process. Remember to keep your devices close to each other and connected to power until the transfer process is completed for quicker transfer.

Step 5: Transfer complete.

Allow the app to complete the transfer process. Once the transfer is complete, you will be prompted to finish setting up your iPad. Follow the instructions to complete the setup process.

Part 2. How to Transfer Photos from Tecno Phantom V Flip to iPad Using Cloud Services (Google Drive)

In addition to dedicated apps like Move to iOS, you can also use cloud-based storage services such as Google Drive to transfer photos from Tecno Phantom V Flip to iPad.

Because it’s stored in the cloud, you can find your photos from any device as long as there is an internet connection. Just upload your photos to Google Drive and later download them on your iPad. It’s also suitable for backup purposes. Google provides its users a 15 GB of free storage.

How to transfer photos from Tecno Phantom V Flip to iPad with Google Drive:

Step 1: Upload photos to Google Drive.

Open Google Drive on your Tecno Phantom V Flip, navigate to the “+” icon, and select “Upload.” Choose the photos you want to transfer and upload them to your Google Drive.

Step 2: Access Google Drive on iPad.

On your iPad, download and install Google Drive if you haven’t. Log in with the same Google account used on your Tecno Phantom V Flip.

Step 3: Download Photos to iPad.

Locate the uploaded photos in Google Drive on your iPad. Tap on each photo or select multiple photos, then click download to save them directly to your iPad.

Part 3. How to Share Pics From iPhone to Android with Dr.Fone

In addition to transferring photos from Tecno Phantom V Flip to iPad, you might also be interested in sharing pictures from iPhone to Android. Although both iPad and iPhone belong to the same Apple ecosystem, they function on slightly distinct operating systems— iPads utilize iPadOS, whereas iPhones operate on iOS.

For an efficient transfer of pictures from iPhone to Android, Wondershare Dr.Fone comes into play. This versatile tool features a dedicated Phone Transfer tool that enables comprehensive sharing of photos and other media content.

This method is particularly well-suited for streamlined bulk photo transfers, making it an ideal choice for individuals seeking a more encompassing solution for data transfer.

Dr.Fone Basic

Backup & Restore iOS Data Turns Flexible.

• One-click to back up the whole iOS device to your computer.
• Preview and selectively restore files to any device with simplicity.
• Export what you want from the backup to your computer.
• Your device’s data remains intact during the restore process.
• Supports iPhone, iPad, iPod touch, and the latest iOS version.

4,781,237 people have downloaded it

How to share pics from iPhone to Android with Dr.Fone Phone Transfer tool:

Step 1: Open Dr.Fone’s Phone Transfer tool

Make a connection between your iPhone and your Tecno Phantom V Flip on your computer. Launch Wondershare Dr.Fone on your computer and navigate to Toolbox > Phone Transfer.

Step 2: Specify the source and destination devices

After connecting them, the platform will identify the connected devices and load their data. Choose iPhone as the source and Android as the destination device to set the transfer path. Use the Flip button to alter the transfer direction.

Step 3: Choose photos for the transfer

Proceed to select the types of data you wish to transfer. Checkmark photos and click the Start Transfer button. If you want to remove existing data from the destination device, you can select “Clear data before copy.”

Step 4: Disable iCloud syncing

Now, Dr. Fone’s Phone Transfer tool should prompt you to disable iCloud syncing. Follow the instructions.

TubeDigger - online video downloader from mostly any site

Step 5: Monitor data transfer progress

The progress of the data transfer will be displayed in a pop-up window. Once completed, click OK to conclude the process.

Part 4. Mistakes to Avoid When Transferring Photos from Tecno Phantom V Flip to iPad/iPhone

Transferring photos from your Tecno Phantom V Flip to an iPad or iPhone holds the promise of seamless photo sharing. However, several factors can contribute to the failure of file transfer processes. To address them, it’s essential to navigate through common mistakes that users often encounter so you won’t make the same errors.

1. Insufficient battery levels

Users often attempt photo transfers with low battery levels on either device. For a successful process, it is crucial to make sure that both your Android and iPad/iPhone have sufficient battery levels or are connected to power sources during the transfer.

2. Limited storage space

Overlooking available storage space on the iPad/iPhone is a common oversight. To avoid transfer failures, check and clear sufficient space on your iPad/iPhone to accommodate the photos you intend to transfer.

3. Interference from Third-Party Apps:

Allowing interference from other apps during the transfer. Close unnecessary apps on both devices to prevent potential conflicts and ensure a smoother transfer process.

4. Ignoring file compatibility:

Apple and Android devices often have varying file compatibilities. For example, iPhones commonly employ the HEIC format, which may pose recognition challenges on Android devices. So, verify that the photo formats are compatible with both Android and iOS devices. If necessary, convert files to ensure a trouble-free transfer.

5. Skipping App Permissions:

When you use apps to transfer files, they usually ask for permission to access your media files. While it’s common for users to overlook this step or hesitate to do it, not granting access can actually lead to transfer failures. The app needs permission to access and transfer files securely.

Conclusion

Although they work in different operating systems, transferring photos between Android and Apple devices, including iPad and iPhone, can be accomplished through various methods. Apps like Move to iOS and Dr.Fone provide straightforward solutions, while cloud services like Google Drive offer convenient alternatives.

How to Transfer Photos from Tecno Phantom V Flip to New Android?

The phone industry, for years, has constantly improved on the design and development of mobile phones being released into the market. One of the major developments is the introduction of the camera to mobile phones. The ease of carriage and portability has made mobile phone cameras a preference over digital cameras. As a result we are witnessing more pictures taken with the aid of a phone. This also means most of these photos are stored on the phone memory.

Most of these photos would need to be shared with other people who are either a part of the photo or you would want to transfer them to your new android device. Most users are at a loss about how to transfer their photos from one android device to another. There are several ways to do that successfully without the risk of losing your priced photos. And in this article we have outlined several ways through which you can transfer your photos from your Tecno Phantom V Flip to your new android device.

Part 1. Transfer Photos from Tecno Phantom V Flip to New Android with a File Transfer Software

One way of moving your photos between android devices is through the use of file transfer software. This software enables you to connect both android devices together.

Using file transfer software to move your photos from one android device to another android device provides a secure and sure transfer window, ensuring your files won’t be lost. Reliable software you can use for this purpose is the Dr.Fone - Phone Transfer software. Dr.Fone - Phone Transfer file transfer software is topnotch and user friendly. This article will carefully lead you through the process of using this software.

Dr.Fone - Phone Transfer

Transfer Everything from Android/iPhone to New iPhone in 1 Click.

• It supports all the leading iOS devices, including devices running on iOS 11.
• The tool can transfer your photos, videos, contacts, messages, music, call logs, notes, bookmarks, and so much more.
• You can transfer all your data or select the type of content you wish to move.
• It is compatible with Android devices as well. This means you can easily perform a cross-platform transfer (e.g. iOS to Android).
• Extremely user-friendly and fast, it provides a one-click solution

3981454 people have downloaded it

Ensure you have a good PC where you would download and install the Dr.Fone software. When the software has installed, go to desktop home screen and double click on the icon. You can follow the steps below to start a file transfer.

Step 1. Click on “Switch” module after you open Dr.Fone toolkit

Step 2. Connect both phones to PC and select “Photos”

Using a good USB cable, connect both old and new devices to your PC. When that is done, a list of data that can be transferred will appear. Choose “Photos” and this will move your photos from the source device to the destination device. You can also change both device between “source” and “Destination” by using the “Flip” button.

Step 3. Click “Start Transfer”

Click on the button “Start Transfer”. Keep phones connected. Dr.Fone starts to transfer photos. Go to view trabsferred photos on the destination phone until it completes.

Part 2. How to Transfer Photos from Tecno Phantom V Flip to New Android Using NFC

Near Field Communication(NFC) is a technology that supports Android Beam and is ideal for transferring data between android devices by just pressing their backs together. It is a fast and simple program that requires both devices to NFC-capable. This means they are able to communicate with each other when their fields are near. This communication is made possible through radio frequencies. Most devices have NFC hardware integrated underneath their panel.

NFC can be found in almost every android device. In the past, it was easy to identify devices with NFC as such devices usually had NFC printed somewhere in the back of the Tecno Phantom V Flip devices, most tines on the battery pack. But since most android devices don’t have a removable back, there is an alternative to checking if your device is NFC enabled.

1. On your Tecno Phantom V Flip, tap on “Settings” and click on “More” located under “Wireless and Networks” .

EmEditor Professional (Lifetime License, non-store app)

This would take you to a screen where you should find the NFC and android beam options as depicted in the image below. At this stage enable both options if any or both have been disabled. If the NFC option doesn’t appear, it then means your device does not have Near Field Communication (NFC) functionality.

2. Another method of checking is by opening settings menu and tapping on the search icon. Type in “NFC”. If your phone is capable, it will show up. The NFC function works hand-in-hand with the android beam. NFC may not work at optimal levels if android beam is “off”.

To Transfer Photos from your Tecno Phantom V Flip to a new android device, ensure both devices support NFC using the method explained above. Once this is confirmed, use Android beam to access the photos you want to transfer to your new android device.

1. To select multiple photos, long press on a photo. Then choose the photos you want to transfer to new android device. When you are done selecting, you can begin the beaming process.

2. Next, place both devices against each other, back to back.

3. At this stage, both an audio sound and visual message will appear, acting as confirmation that both devices have found each other’s radio waves.

4. Now, on your Tecno Phantom V Flip, the screen will reduce to a thumbnail and a “Touch to beam” message will pop up at the top.

To begin beaming, you must touch the screen on your Tecno Phantom V Flip from where the photos are been sent. A sound will alert you that beaming has started.

To ensure a successful transfer, make sure devices are not locked neither should the screen be turned off. Also both devices should be kept back-to-back throughout the duration of the transfer.

5. Finally, when the beaming is complete, you will hear an audio sound. This is to confirm completion of the process. Alternatively, instead of an audio confirmation, the application on your new android device to which the photos were sent will automatically launch and display the beamed content.

Part 3. Transfer Photos between Android Phones by Bluetooth

The Presence of Bluetooth technology in phones is as old as android itself. The use of this technology offers another method that you can employ in transferring your photos from your Tecno Phantom V Flip to your new android device. It is a short and simple method that is known to most android users.

The purpose of this article is to guide you through the process of successfully transferring your photos from your Tecno Phantom V Flip to your new android device. This process involves navigating to the Bluetooth option on your device, connecting to your new device and initiating transfer. The steps are outlined below

1. Locate the Bluetooth on both devices. Go to your Settings and click on the “Connected device “Option. Under that option, you will find Bluetooth, click on it and toggle it on. Do the same for the receiving device.

2. Your device will start searching for nearby visible devices to pair with. Make Sure your new android device is visible to other devices. When your android device appears on the list of available devices on your old Android, select it to pair.

A message will pop up on your new android device, requesting permission to pair with your Tecno Phantom V Flip. Click “Accept “to establish connection.

3. After both devices have successfully been paired to each other, go to the folder containing the Photos your want to send to your new Android device. Select the photo or if they are more than one, long press on a photo. This will create a thumbnail. Select the photos you want to transfer and choose the share button normally depicted by this icon

4. A list of option will appear. Choose Bluetooth. This will take you back to The Bluetooth application. Click on your new android device that you have previously paired with. A Message will appear on your new device asking for permission to receive the photos from your Tecno Phantom V Flip. Click “Accept”. This will initiate the transfer process. A progress bar at the top of your screen will show you the Progress of each transfer.

DEX 3 RE is Easy-To-Use DJ Mixing Software for MAC and Windows Designed for Today’s Versatile DJ.

Mix from your own library of music, iTunes or use the Pulselocker subsciprtion service for in-app access to over 44 million songs. Use with over 85 supported DJ controllers or mix with a keyboard and mouse. 

DEX 3 RE is everything you need without the clutter - the perfect 2-deck mixing software solution for mobile DJs or hard-core hobbiests. 
PCDJ DEX 3 RE (DJ Software for Win & MAC - Product Activation For 3 Machines)

Part 4. Transfer Photos from Old to New Android Phones via Device-Specific App

Samsung Smart Switch

The Samsung smart switch software helps to Transfer Photos either by cable or wireless transfer If your Samsung device does not come with the software, you can download it here .

1. Open the switch app on both Samsung devices. On the sending device, tap “Send data” and on the receiving device, tap “Receive data”.

2. Now, choose either the Cable option using an OTG adapter or wireless transfer option.

3. On the old Samsung device, select the data to be transferred to the new Samsung device. When you are done with this, your phone will notify the size and time length of the transfer.

4. Thereafter, click on “Send” to begin the transfer of data from on device to the other.

LG Mobile Switch

LG’s mobile switch software is device specific software that allows for data transfer. Follow the steps below.

1. Switch on your LG device. On the home screen, swipe left. Click on Management and tap “LG Mobile Switch”. Select the data to be transferred and tap on “agree”. A list of options will appear on how to transfer the data; select “Wireless” and tap receive. On the screen that comes up next, tap on “Start”.

2. Now go to your old LG device and open the software. Click on “Send Data” and choose “send data wirelessly”. Next, tap “tap start” and choose the name of your new phone. Then click on “accept” and on the new device, tap on “receive”. Select the data to be sent and tap “Next”. This will start the transfer. When it is completed, the data would have been transferred from your old android to the new android.

Huawei Backup

Huawei devices have HiSuite, an inbuilt manager tool. This app helps users to manage the data on their Huawei devices and also to back up and restore data. To backup and restore on Huawei devices using Hisuite, follow the steps below

1. Download the tool here and install. This tool is supported by windows only. Then, open the tool and connect your Huawei device to you PC by means of a USB cable.

2. Go to settings app on your android device and click on “advanced settings”. Click on “security” and choose “Allow Hisuite to use HDB”. You will see the “Back Up” and “Restore” options. Click on “Back Up” and select the data you want to back up. You can encrypt your backup with a password. Then click on “Back Up”.

3. Click on “Restore” to retrieve data from previous backups after selecting the backup file you want.

How I Transferred Messages from Tecno Phantom V Flip to iPhone 12/XS (Max) in Seconds

Recently, I got a new iPhone 12/XS (Max) with so much excitement. But, the one thing that was driving me crazy was how to transfer messages from my old Android device to this iPhone 12/XS (Max), as I have always been an Android phone user till then. So, I was scared to transfer anything to the new iPhone and ruin it. You can have numerous solutions to transfer text messages from Tecno Phantom V Flip to iPhone 12/XS (Max) after setup.

Well! If you are in a similar situation as me, then I would recommend you go through this article. I have finally opted to import SMS to iPhone 12/XS (Max) from Android.

2 Apps to Transfer Messages from Tecno Phantom V Flip to iPhone 12/XS (Max) without Computer

How to transfer Android messages to iPhone 12/XS (Max) using Move to iOS app

The first method to transfer text messages from Tecno Phantom V Flip to iPhone 12/XS (Max) is using the official Move to iOS app from Apple. Message history, call logs, contacts, web bookmarks, apps, etc. can be transferred from your Android to any iOS device. Though, I have noticed the app was acting strangely during data transfer. My Wi-Fi got some issues, and Move to iOS couldn’t properly complete the transfer.

Guide for Move to iOS to transfer messages from Tecno Phantom V Flip to iPhone 12/XS (Max)

1. Download, install, and launch Move to iOS on your Tecno Phantom V Flip.

2. Get the iPhone 12/XS (Max) and configure the setup and then connect to Wi-Fi. Browse to the ‘Apps & Data’ option, click ‘Move Data from Android’ thereafter. Click the ‘Continue’ button and note the passcode.

   

3. On your Tecno Phantom V Flip, click ‘Continue’ and then press ‘Agree’. When prompted for a passcode, enter the one you got from iPhone 12/XS (Max).

   

4. Ensure that the Android phone is also connected to Wi-Fi. Now, click on ‘Messages’ from the ‘Data Transfer’ option. Click ‘Next’ and wait a while to finish the data transfer. Hit the ‘Done’ button afterward once the iPhone 12/XS (Max) gets synched with these messages, set up your iCloud account, and view the messages.

   

How to transfer Android messages to iPhone 12/XS (Max) using SMS Backup+

You can learn how to transfer messages from Tecno Phantom V Flip to iPhone 12/XS (Max) without a computer using the SMS Backup+ app. It can automatically backup the SMS, call logs, MMS using a different label in Google Calendar and Gmail. Remember that MMS can’t be restored later.

Here is how to transfer messages from Tecno Phantom V Flip to iPhone 12/XS (Max) with SMS Backup+:

1. Get the Android phone and sign in to your ‘Gmail account’ and press ‘Settings’. Go to ‘Forwarding and POP/IMAP’. Now, tap ‘Enable IMAP’ and click ‘Save Changes’.

2. Download SMS Backup+ on your Tecno Phantom V Flip from Google Play Store and launch it. Tap ‘Connect’ choose the recently used Gmail account. Now, allow the app to backup the SMS to your Gmail account and hit ‘Backup’.

   

3. Now, since you’ve backed up your messages to Gmail, you can simply access and view them from any device. Simply launch Gmail with the same account, and you’ll be able to get hold of all your messages right on your iPhone 12/XS (Max).

Note: The messages will be enclosed in an Email attachment. That implies you won’t be able to import your messages to your iMessage app. If you want to transfer SMS to the default messages app, try Dr.Fone - Phone Transfer. It’s a one-click and reliable desktop software.

Easy and Safe Partition Software & Hard Disk Manager

2 Methods to Transfer Messages from Tecno Phantom V Flip to iPhone 12/XS (Max) with a PC

How to transfer all messages to iPhone 12/XS (Max) at a time

For transferring messages from your Tecno Phantom V Flip to iPhone 12/XS (Max), opting for Dr.Fone - Phone Transfer is a great idea. Speak of transferring contacts, photos, music, text messages, etc. from Tecno Phantom V Flip to iOS devices or vice versa, it has a proven record of credibility.

This is how to import SMS to iPhone 12/XS (Max) from Android –

Step 1:  Download Dr.Fone - Phone Transfer on your PC and then install and launch it. Connect your Android and iPhone 12/XS (Max) using respective USB cables.

Step 2:  Hit the ‘Switch’ tab from the Dr.Fone window. Select the Android phone as the source and iPhone 12/XS (Max) as the destination over here. Use the ‘Flip’ button in case you have altered the selection.

Note:    Selecting the ‘Clear Data before Copy’ option completely deletes everything from the target.

Step 3:  In this section, tap on ‘Messages’ and select the ones you want to selectively transfer. Hit the ‘Start Transfer’ button and then wait a while. Click ‘OK’ once the transfer process is over.

How to transfer only selected messages iPhone 12/XS (Max)

Alternatively, you can opt for Dr.Fone - Phone Manager for selectively transferring messages from your Tecno Phantom V Flip to your iPhone. Managing your iPhone is easy with such an effective desktop tool.

Dr.Fone - Phone Manager (iOS)

Quickly and Selectively Transfer Messages from Tecno Phantom V Flip to iPhone 12/XS (Max)

• Managing your iPhone data got easier by exporting, delete, and add data with this software.
• It is compatible with the most recent iOS firmware. It requires no internet connectivity to carry out the data transfer.
• When you are looking for a quick transfer of SMS, videos, music, contacts, etc. to your iPhone 12/XS (Max), this tool is a gem.
• The best-known alternative to iTunes to connect your PC and iPhone.

3981454 people have downloaded it

Here comes the guide to import SMS to iPhone 12/XS (Max) from Android selectively:

Step 1:  Get Dr.Fone - Phone Manager installed and launched on your PC. Now, press the ‘Phone Manager’ tab.

Step 2: Use respective USB cables to connect your Android and iPhone 12/XS (Max) with the computer and then pick Android as the source device. Then, select the ‘Information’ tab displayed on the top.

Step 3:  From the list of messages, choose the desired text messages and hit the ‘Export’ button. Click the ‘Export to device’ button consecutively and complete the process with the onscreen guide.

Conclusion

I hope, this article brought you answers to your messages and data transfer queries. From my own experience, I found Dr.Fone Toolkit as the most viable option. If you are looking for a solution that leads to no data loss, then you can go for either Dr.Fone - Phone Transfer or Dr.Fone - Phone Manager .