Android to Apple: How To Transfer Photos From Tecno Spark 10C to iPad Easily

If you are an Android user and have recently switched to an iPad, you might be wondering how to transfer photos from Tecno Spark 10C to iPad. It is a common question that many people ask when they switch from one device to another. Fortunately, there are several ways to transfer photos from Tecno Spark 10C to iPad easily. In this article, we will show you how to do it using different methods.

We are living in a world where capturing memories is at our fingertips, and the need to share photos across different devices is more prevalent than ever. Whether you’re looking to share your photos with friends or ensure a secure backup, transferring photos from your Android to your iPad shouldn’t be a hassle.

This article is your ultimate guide to executing photo transfer with no problems. We’ll walk you through the process of how to transfer photos from Tecno Spark 10C to iPad as well as iPhone, highlight common mistakes to avoid, and make sure your cherished moments are transferred seamlessly.

Part 1. How Can I Transfer Photos From Tecno Spark 10C to iPad Directly?

For a straightforward photo transfer from Tecno Spark 10C to iPad, Apple’s Move to iOS app can be an excellent choice. It’s important to note, though, that your iPad must be in setup mode for this method to work. If it’s not in setup mode, you’ll need to perform a reset on your iPad before proceeding with the transfer.

How can I transfer photos from Tecno Spark 10C to iPad? Follow the steps below.

Step 1: Set Up Your iPad.

As you set up your iPad, reach the “Apps & Data” screen and select “Move Data from Android.”

Step 2: Install and launch Move to iOS on your Tecno Spark 10C.

Install Move to iOS and open the app on your Android. Review the terms and conditions and press “Agree” to proceed.

Step 3: Enter the code.

A six to ten-digit code will be displayed on your iPad screen. Enter this code when prompted on your Tecno Spark 10C.

Step 4: Select photos to transfer.

In the Move to iOS app, choose “Photos” to transfer your images. Then, tap “Continue” to initiate the transfer process. Remember to keep your devices close to each other and connected to power until the transfer process is completed for quicker transfer.

Step 5: Transfer complete.

Allow the app to complete the transfer process. Once the transfer is complete, you will be prompted to finish setting up your iPad. Follow the instructions to complete the setup process.

Part 2. How to Transfer Photos from Tecno Spark 10C to iPad Using Cloud Services (Google Drive)

In addition to dedicated apps like Move to iOS, you can also use cloud-based storage services such as Google Drive to transfer photos from Tecno Spark 10C to iPad.

Because it’s stored in the cloud, you can find your photos from any device as long as there is an internet connection. Just upload your photos to Google Drive and later download them on your iPad. It’s also suitable for backup purposes. Google provides its users a 15 GB of free storage.

How to transfer photos from Tecno Spark 10C to iPad with Google Drive:

Step 1: Upload photos to Google Drive.

Open Google Drive on your Tecno Spark 10C, navigate to the “+” icon, and select “Upload.” Choose the photos you want to transfer and upload them to your Google Drive.

Step 2: Access Google Drive on iPad.

On your iPad, download and install Google Drive if you haven’t. Log in with the same Google account used on your Tecno Spark 10C.

Step 3: Download Photos to iPad.

Locate the uploaded photos in Google Drive on your iPad. Tap on each photo or select multiple photos, then click download to save them directly to your iPad.

Part 3. How to Share Pics From iPhone to Android with Dr.Fone

In addition to transferring photos from Tecno Spark 10C to iPad, you might also be interested in sharing pictures from iPhone to Android. Although both iPad and iPhone belong to the same Apple ecosystem, they function on slightly distinct operating systems— iPads utilize iPadOS, whereas iPhones operate on iOS.

For an efficient transfer of pictures from iPhone to Android, Wondershare Dr.Fone comes into play. This versatile tool features a dedicated Phone Transfer tool that enables comprehensive sharing of photos and other media content.

This method is particularly well-suited for streamlined bulk photo transfers, making it an ideal choice for individuals seeking a more encompassing solution for data transfer.

Dr.Fone Basic

Backup & Restore iOS Data Turns Flexible.

• One-click to back up the whole iOS device to your computer.
• Preview and selectively restore files to any device with simplicity.
• Export what you want from the backup to your computer.
• Your device’s data remains intact during the restore process.
• Supports iPhone, iPad, iPod touch, and the latest iOS version.

4,781,237 people have downloaded it

How to share pics from iPhone to Android with Dr.Fone Phone Transfer tool:

Step 1: Open Dr.Fone’s Phone Transfer tool

Make a connection between your iPhone and your Tecno Spark 10C on your computer. Launch Wondershare Dr.Fone on your computer and navigate to Toolbox > Phone Transfer.

Step 2: Specify the source and destination devices

After connecting them, the platform will identify the connected devices and load their data. Choose iPhone as the source and Android as the destination device to set the transfer path. Use the Flip button to alter the transfer direction.

Step 3: Choose photos for the transfer

Proceed to select the types of data you wish to transfer. Checkmark photos and click the Start Transfer button. If you want to remove existing data from the destination device, you can select “Clear data before copy.”

Step 4: Disable iCloud syncing

Now, Dr. Fone’s Phone Transfer tool should prompt you to disable iCloud syncing. Follow the instructions.

Step 5: Monitor data transfer progress

The progress of the data transfer will be displayed in a pop-up window. Once completed, click OK to conclude the process.

HD Video Converter Factory Pro

ZoneAlarm Extreme Security NextGen

Part 4. Mistakes to Avoid When Transferring Photos from Tecno Spark 10C to iPad/iPhone

Transferring photos from your Tecno Spark 10C to an iPad or iPhone holds the promise of seamless photo sharing. However, several factors can contribute to the failure of file transfer processes. To address them, it’s essential to navigate through common mistakes that users often encounter so you won’t make the same errors.

1. Insufficient battery levels

Users often attempt photo transfers with low battery levels on either device. For a successful process, it is crucial to make sure that both your Android and iPad/iPhone have sufficient battery levels or are connected to power sources during the transfer.

2. Limited storage space

Overlooking available storage space on the iPad/iPhone is a common oversight. To avoid transfer failures, check and clear sufficient space on your iPad/iPhone to accommodate the photos you intend to transfer.

3. Interference from Third-Party Apps:

Allowing interference from other apps during the transfer. Close unnecessary apps on both devices to prevent potential conflicts and ensure a smoother transfer process.

4. Ignoring file compatibility:

Apple and Android devices often have varying file compatibilities. For example, iPhones commonly employ the HEIC format, which may pose recognition challenges on Android devices. So, verify that the photo formats are compatible with both Android and iOS devices. If necessary, convert files to ensure a trouble-free transfer.

5. Skipping App Permissions:

When you use apps to transfer files, they usually ask for permission to access your media files. While it’s common for users to overlook this step or hesitate to do it, not granting access can actually lead to transfer failures. The app needs permission to access and transfer files securely.

Conclusion

Although they work in different operating systems, transferring photos between Android and Apple devices, including iPad and iPhone, can be accomplished through various methods. Apps like Move to iOS and Dr.Fone provide straightforward solutions, while cloud services like Google Drive offer convenient alternatives.

Tips of Transferring Messages from Tecno Spark 10C to iPhone 14/15

Are you switching your phone to the latest iPhone 14 or 15 and wondering how to transfer your important text messages from your Tecno Spark 10C? Unlike transferring photos, moving texts poses a unique challenge as the options available are relatively limited.

Transferring your messages allows you to keep your important messages intact, preserving cherished conversations and important information. Be it a heartfelt message from a loved one or crucial details in a business conversation, some of your text messages must hold significant sentimental and practical value.

This article will guide you through effective and easy methods to transfer texts from Tecno Spark 10C to iPhone. Let’s explore together the best ways to transfer texts and overcome the hurdles that come with this process.

When it comes to seamlessly transferring SMS from Tecno Spark 10C to iPhone, Apple’s official app, “Move to iOS,” can be a reliable and straightforward solution. This app is designed to streamline the transfer process, allowing you to move not only your text messages but also other essential data to your iPhone.

To use this Move to iOS app, you need to download it from the Google Play Store first on your Tecno Spark 10C. Then, follow the steps to transfer SMS from Tecno Spark 10C to iPhone here:

• Step 1: Setup your iPhone. Power up your new iPhone 14 or 15 and progress through the initial setup until you reach the “Apps & Data” screen. At this point, select the option that reads “Move Data from Android.”
• Step 2: Agree to Terms and Conditions. Open Move to iOS on your Tecno Spark 10C. Then, review and tap “Agree” to Terms and Conditions to proceed.
• Step 3: Enter the Code. On your Tecno Spark 10C, a screen will appear, requesting a 6–10-digit code. This code will be generated on your iPhone. Enter the displayed code on your Tecno Spark 10C to make a secure connection between the two devices.
• Step 4: Select Content to Transfer. With the Tecno Spark 10C devices now connected, you can choose the types of content you wish to transfer. Select “Text Messages” and any other data you want to move to your new iPhone. Tap “Continue” to initiate the transfer process.

**Tip:**Keep your devices close to each other and connected to power until the transfer process is completed.

• Step 5: Once the transfer is complete, you will be prompted to finish setting up your iPhone. Follow the instructions to complete the setup process, and you’re done.

PDF application, powered by AI-based OCR, for unified workflows with both digital and scanned documents.

How To Move Text Messages From Tecno Spark 10C to iPhone Quickly with Computer

If you’re looking for a swift and reliable way to move text messages from Tecno Spark 10C to iPhone, third-party software like Wondershare Dr.Fone can be the perfect go-to solution.

Packed with a user-friendly interface, this software streamlines the process, ensuring a quick and efficient transfer of your messages through its Phone Transfer feature. Dr.Fone Phone Transfer supports seamless data transfer between Android and iOS devices and vice versa. It also regularly updates so that compatibility won’t be an issue.

vMix Basic HD - Software based live production. vMix Basic HD includes 4 inputs, 3 cameras, streaming, recording, playlist.
This bundle includes Studio 200 for vMix from Virtualsetworks, HTTP Matrix 1.0 automation scheduler, and 4 introductory training videos from the Udemy vMix Basic to Amazing course.

How to transfer texts from Tecno Spark 10C to iPhone with Dr.Fone

• Step 1: Open Wondershare Dr.Fone from its official website , and find the phone transfer tool.

.

• Step 2: Specify the source and destination devices. After connecting to your devices, Dr.Fone will identify the connected devices and load their data onto the platform. Choose your Android as the Source device and your iPhone as the Destination device to set the transfer path. Use the Flip button if necessary to alter the transfer direction.

• Step 3: Choose text messages as data types for transfer. Proceed to select the types of data you wish to transfer. Checkmark the text messages category and click the Start Transfer button. If you want to remove existing data from the destination device, you can select “Clear data before copy.”

• Step 4: Monitor music transfer progress. The progress of the data transfer will be displayed in a pop-up window. Once completed, click OK to conclude the process.

Troubleshoot Why I Can’t Transfer Texts from Tecno Spark 10C to iPhone

Even with the reliable methods mentioned earlier, there may be instances where you encounter difficulties in transferring texts from your Android to your iPhone. Don’t worry; we’ve got you covered with solutions to common issues that might hinder a smooth transfer.

• 1. Interrupted transfer

The transfer process may be interrupted if you use other apps, receive a phone call, or navigate away from the transfer screen on your Tecno Spark 10C before it completes. So, make sure that both devices are left undisturbed until the transfer process is complete.

If you navigate away from the “Move to iOS” app on your Android or receive a phone call during the transfer, it may disrupt the process. Restart the transfer and keep both devices active until completion.

• 2. Problems with Wi-Fi connection

Wi-Fi connection issues on the Android device can hinder the transfer process. This may be caused by apps or settings affecting Wi-Fi, such as Sprint Connections Optimizer or the Smart Network Switch.

To address it, you can turn off apps or settings that might affect Wi-Fi on your Tecno Spark 10C, forget known Wi-Fi networks, and retry the transfer. It’s important to maintain a stable Wi-Fi connection on both devices throughout the transfer.

• 3. Partial content transfer or iOS device full message

Users may encounter situations where only some content is transferred, or the iOS device appears full despite an incomplete transfer. This can lead to potential data loss.

For this issue, you can consider erasing your iOS device and starting the transfer again. Make sure that the available space on your iPhone accommodates the Android content. Delete unnecessary data or apps on your iPhone to free up space if needed.

Bonus: How to Back Up Messages with Google Drive

In addition to seamless transfers between devices, backing up your text messages becomes equally important. Fortunately, Google Drive offers a convenient solution by allowing you to back up your messages with ease. Turning on backup on Google Drive ensures that your valuable SMS history remains safe and accessible whenever you need it.

• Step 1: Open your Tecno Spark 10C’s Settings. Start by opening your Android “Settings” and navigate to the “System,” “System & Updates,” or “About phone” section.
• Step 2: Select “Backup” or “Backup & Restore”. Within the “System” settings, look for the “Backup” or “Backup & Restore” option. Tap to access the backup settings for your device.
• Step 3: Choose a Google account. Under the backup settings, you’ll find the option to select the Google account to which you want to back up your data. Make sure that you are signed in with the Google account you want to use for the backup.
• Step 4: Turn on backup. Your phone will show you that turning on backup will include backing up your text messages. Tap “Turn on” to proceed with the backup.

SwifDoo PDF Perpetual (2-PC) Free upgrade. No monthly fees ever.

Conclusion

Switching phones to the latest model is an exciting occurrence. However, the challenge of transferring crucial data, especially text messages, from an Android to a new iPhone can be challenging.

Fortunately, armed with the insights from this article, we’ve delved into two effective methods for seamlessly transferring text messages: using Apple’s official “Move to iOS” app and leveraging third-party software like Wondershare Dr.Fone. With these methods, you can bid farewell to any complications associated with message transfers.

Two Ways to Sync Contacts from Tecno Spark 10C to Gmail

If you have ever lost your phone, you will agree that getting all the information that used to be on your misplaced device back can be a very trouble-laden venture, which can sometimes end in heartbreak.

One of the most important stuff you can keep on your phone is your contacts, the information about the people in your life, as well as their phone numbers. This can prove to be the most difficult data to get back after a phone is lost. Therefore, this article will tell you ways to keep your contacts updated by synchronizing contacts from Tecno Spark 10C to Google mail account. As with almost everything in the tech world, there is more than one way to skin a cat, and this is especially true about synchronizing contacts on Android phones.

There are two major ways to transfer contacts from Android phone to Gmail. So, shall we begin to discuss this?

Part 1: How to Sync Contacts from Tecno Spark 10C to Gmail? (Easier way)

One of the best ways to synchronize contacts from the phone to Gmail is to use a handy tool known as Dr.Fone - Phone Manager (Android) . It is one of the widely used and accepted tools for managing and transferring your Tecno Spark 10C contact details to another platform.

Dr.Fone - Phone Manager (Android)

One-Stop Solution to Sync Contacts from Tecno Spark 10C to Gmail

• Transfer, manage, export/import your music, photos, videos, contacts, SMS, Apps, etc.
• Backup your music, photos, videos, contacts, SMS, Apps, etc. to computer and restore them easily.
• Highlighted features such as 1-click root, gif maker, ringtone maker.
• Fully compatible with 3000+ Android devices (Android 2.2 - Android 8.0) from Samsung, LG, HTC, Huawei, Motorola, Sony, etc.

3981454 people have downloaded it

To use this safe and reliable way to synchronize contacts with Gmail on Android, follow these steps:

• 1. First of all, download the Dr.Fone software on your Windows PC and follow the installation instructions, then launch the software after the application has successfully installed.
• 2. Click on the “Phone Manager” option to continue to the next screen of the software.
• 3. Connect your phone to your PC via a USB cable. Ensure that USB debugging is enabled on your phone
• 4. Now click on the “Information” tab at the top of the interface of the software.

• 5. On the left side pane, click on the “Contacts” option to view the contacts available on your device.
• 6. You can select the contacts you wish to transfer to your PC or just simply select all and uncheck unwanted contacts.
• 7. Click on the “Export” button and choose “to vCard file” as your export format.

• 8. You will be taken to a page to select where you want the file to be saved on your PC, select the location, and click on OK to start exporting your contacts.

Once your contacts have been successfully saved to your PC as a vCard or in.VCF format can be easily imported into your Gmail account right from your computer by following these steps.

• 1. Open browser on your PC and Login to your Gmail account.
• 2. On the left side pane, click on the Gmail drop-down arrow to see and click on the “Contacts” option.
• 3.Tap on the “More” button and select “Import” from the list. Gmail will open a pop-up for you to select the location of the previously saved.VCF or vCard file.

• 4. Select the vCard and then hit the “Import” button. Your contacts will be imported into your Gmail account in no time.

If you followed these steps, you would not only have synced your contacts with your computer, and you would also have synchronized them with your Gmail account.

Thus, by using Dr.Fone - Phone Manager (Android), you can not only easily transfer contacts from the phone to the Gmail account but also keep them safe from any data loss.

Part 2. How to Sync Contacts from Tecno Spark 10C to Gmail? (Official Way)

There is also a way whereby you can sync your contacts to your Gmail account on Android using just Your Tecno Spark 10C. You can do this simply by following these steps:

• 1. The first thing would be to ensure that Gmail is installed on your phone. If it is not, go to Play Store and install the Gmail App on your phone.
• 2. Now, go to your phone Settings, then tap on the “Accounts and Sync” option.
• 3. Tap on the Accounts and Sync service on the next screen.
• 4. Choose your Gmail account from the email accounts setup page.

• 5. Enable the “Sync Contacts” option.
• 6. Tap on the Options tab and then on the “Sync Now” button and wait until your Contacts have been successfully synchronized with your Google mail account. You will know that the Contacts have successfully completed synchronization when the “Sync” icon disappears.

And that’s it! You have successfully transferred your contact from the phone to your Gmail account. Also, when you initially add and set up a Gmail account on your mobile device, the “Automatically Sync” option should be switched on by default. If this does not occur for some reason, there are ways by which the error can be dealt with. These methods of fixing the error shall be addressed in the latter portion of this article.

Part 3. Other Ways to Backup Android Contacts

Smartphone users as a whole never want to lose their contacts; however, sometimes, due to human error or a program glitch or sheer mistake, it does happen. So it is pertinent for you to desire to have a backup of your contacts before entrusting the rest into the hands of an online backup program, in this case, your Gmail accounts. It is not about being paranoid; it is just a case of taking precautions to avoid the loss of contacts while you sync Android to Gmail account.

Although there has been no record of such occurrence in the past from users who export contacts from Tecno Spark 10C to Gmail, it is still advisable to perform a backup.

Another way to back up your contacts before you sync contacts from Tecno Spark 10C to Gmail can be found in this article: Four Ways to Backup Android Contacts Easily .

Part 4. Basic Solutions to Fix Google Contacts Syncing Issues on Android

In the above parts, you have learned how to transfer contacts from Tecno Spark 10C to Gmail. So what if your contacts have, for some reason, refused to sync? Well, don’t panic; here are some of the possible fixes for the problem.

Ensure that the Sync option is turned on for your device. To do this, simply:

1. Tap on Settings for your device
2. Go to Data Usage, then go to Menu.
3. Ensure that the “Auto-Sync data” option is active on your device, if not, activate it.
4. If it is already turned on, try toggling it on and off a few times, then proceed to Sync your Contacts.

Ensure that Google Contacts sync is turned on. To do this, simply:

• Once again, go to Android Settings.

1. Go to the “Accounts” option.
2. Go to the Google Account that you have used as your backup preference.
3. Make sure that the “Contacts” option for the sync data is turned on.
4. If it is already on and is still not working, try toggling the option on and off a few times.

Make sure that you have an active Internet connection, and that background data is switched off. The importance of checking your Internet connection before proceeding to more extreme measures for all issues cannot be ignored. The issues that may be disturbing you might be due to an issue with your device’s connection to the Internet

1. Switch Off and Switch On your Data Connection.
2. Go to Settings, then go to “Data Usage” and ensure that Restricting Background Data is disabled on your device.

Clear the App Cache for Google Contacts.

1. Go to Settings
2. Then tap on “Apps” or “Apps Manager,” depending on your device and Android version.
3. Go to all Apps and find Contact Sync.
4. Select Clear Cache and also Clear Data.
5. This should knock the Contacts sync back to normal and ensure that your sync goes on without a hitch from there on out.

Remove your Google Account and set up again. The issue you are facing might be due to a malfunctioning Google Account setup. To fix this:

1. Go to Settings.
2. Go to Accounts, then proceed to your Google Account.
3. Select the Remove Account option
4. Then proceed to set up your email account again.

As a last-ditch fix, some users have reported that an account merging for the contacts fixed the problems of the contacts not syncing. To do this, do the following steps:

1. Go to Contacts
2. Tap on the menu, then tap on “Contacts to Display” option
3. Select “Only Device”. Note that this will make only the contacts saved on the Tecno Spark 10C device to display.
4. Tap on “Menu” and then on “Merge Accounts”
5. Select Google Merge. This will merge all your Contacts with Google.
6. Go back and select Menu again, this time selecting “Contacts to Display”, then “All Contacts”
7. This should make all the contacts on your device to appear, and your sync problem should also be solved.

These fixes should ensure that your sync of contacts with the Google Account is now fixed, and you are now able to backup and sync your contacts to your Gmail Account. It is also worthy of note that if you want new contacts to be saved automatically to your Google account, you have to select the Google Account option when prompted on where to save the new contact, or else, the contact will not be automatically synced to your Gmail account, and you will have to create an export to add it to your Google Contacts.

Also, keep in mind that it might take a longer period of time for the contacts to synchronize to Google on a slower network connection, in deviance to a fast network connection, so you might need to exercise some patience if you’re on a slower Internet connection.

It can sometimes be bewildering and baffling when people probably lose their phones, and then they complain of loss of contacts. However, you need not worry about such loss of information again in this technological age since there are several ways to backup contacts. All the methods mentioned above are easy to execute and will help you transfer contacts from the phone to Gmail in a snap.

Lastly, you can also use Dr.Fone - Phone Manager (Android) for smoothly exporting contacts from Tecno Spark 10C to Gmail.