How to Fix iPhone Stuck at ‘attempting data recovery’ Loop

Summary: If your iPhone gets stuck at ‘attempting data recovery’ loop screen while updating iOS, learn how to fix iPhone failed iOS update error and efficiently recover lost data using Stellar Data Recovery for iPhone.

Since the release of iOS 16, there are frequent complaints about flood updates leading to the ‘attempting data recovery’ loop. Moreover, users are concerned about data loss in such situations.

Users globally reported that their iPhone gets stuck in the ‘attempting data recovery’ loop while trying to install iOS updates. The issue occurs when they update to iOS 16 versions by using iTunes. It leaves the update in the lurch and erases some or all data from their iPhone.

iOS updates breathe new life into your device. However, the truth is that Apple’s every update brings some bug or new problem, like this one.

Read this post further if your iPhone screen gets stuck at the ‘attempting data recovery’ loop during an iOS update.

It shares how to fix iPhone ‘attempting data recovery’ failed problem and recover lost iPhone data in any case.

You can apply the methods on iPhone 14, 13, 12, SE, 11, XS, XR, X, 8, 7, 6, 5, and 4 series. They are relevant to iOS 16 and below versions.

Common causes of ‘attempting data recovery’ loop on iPhone

The attempting to data recovery failed problem usually occurs when iOS is updated with iTunes. The ‘attempting data recovery’ screen takes a long time and is often followed by a prompt ‘press home button to restore.’

Some of these occurrences were reported in the following scenarios:

• Users unplugged the iPhone from a PC or Mac during the update
• Downgrading from iOS 16 to 15 or below
• Updating iOS after jailbreak

How to fix iPhone stuck at the ‘Attempting Data Recovery’ loop

1. Force Restart iPhone
2. Put iPhone into Recovery Mode

Method 1: Force Restart iPhone

It’s essential to know that a force restart differs from a normal Restart. A force restart is advised when iPhone is not in its normal working condition. It is either hanged or stuck at the Apple logo or another screen in Recovery Mode or Restore Mode. It cuts the power and turns on the iPhone again. Force restart usually fixes many iPhone issues.

Steps to Force Restart iPhone 8 and earlier:

• Press and fast release the Volume Up button
• Press and fast release the Volume Down button
• Press and hold the Side button (power) until the Apple logo appears

Steps to Force Restart iPhone X and later:

• Press and quickly release the Volume Up button
• Press and quickly release the Volume Down button
• Press and hold the Side button until you see the recovery-mode screen.

Method 2: Put iPhone into Recovery Mode

If Force Restart doesn’t help, try this method. Recovery Mode helps in cases of failed iOS updates. Thus, whenever the iOS updates, the iPhone gets stuck at the ‘attempting data recovery,’ op put the device on Recovery Mode.

[Caution]: Recovery Mode erases the iPhone data, which can be restored with the help of iTunes backup. So, make sure that the iTunes version is the latest.

Steps to put iPhone on Recovery Mode:

1. Connect iPhone to computer
2. Open iTunes
3. Force restart iPhone (with steps mentioned above)
4. A dialog box appears. Select Update

5. After the Update process completes, set up your iPhone.

Fixed ‘attempting data recovery’ failed problem. Further, how to restore data on iPhone

Recovery Mode, though fixes iPhone’s ‘attempting data recovery’ issue but at the same time erases all information from the device. You can restore iPhone data from iTunes backup or iCloud backup.

In case, iTunes/iCloud backups are not able to restore iPhone or you discover that some of the data is still missing after restoring the device, choose Stellar Data Recovery for iPhone .

The software is also helpful when you don’t want to recover all the data from iTunes or iCloud unnecessarily. Instead, it. It lets you recover precisely what you want, by allowing you to choose specific files like photos, videos, WhatsApp chats, or memos, Calendar, etc., and restoring them on the device.

Additionally, Stellar Data Recovery for iPhone also restores the data lost and deleted after jailbreak, water damage, a Black screen of death, iPhone stuck at Apple logo , screen damage iPhone, factory reset, etc. It supports recovery from iPhone 15, 14, 13, 12, SE, 11, XS, XR, X, 8, 7, 6, 5, and 4 series.

Steps to Restore Data on iPhone with Stellar Data Recovery of iPhone

• Download Stellar Data Recovery for iPhone on PC/ Mac
• Connect iPhone to the computer
• Select iTunes from the software screen
• Follow the simple on-screen instructions

Wrapping Up

Users look forward to iOS updates. However, the experience can get irritating, when iPhone software updates fail. For example, iPhone ‘attempting data recovery’ loop is a common problem faced after attempts to upgrade to the latest iOS 16.

Force restart of the device often resolves the ‘attempting data recovery’ loop issue. If this doesn’t work, further try to get your iPhone on Recovery Mode. Later restore data via iTunes or Stellar Data Recovery for iPhone. The software approach is straightforward and lets you select and restore the informathat you want.

How to recover data from dead iPhone

Summary: Recovering data from a dead iPhone is precarious if you don’t acquire knowledge about your iOS device. Be wary of how your device works and its data backup options to avert data loss problems in the future. If your iPhone has turned dead because of a major technical glitch, you can recover the data stored in it using a reliable data recovery software. This blog encapsulates all such concrete details with a step-by-step guide to recover data from dead iPhone.

iPhone is one of the most affluent smartphones loaded with advanced features. Most people invest in it because its upbeat features and advanced technology intrigue them. Every time Apple announces a new upgrade or introduces new features to its iOS software upgrade, iPhone fans dig deep to learn more about it.

If your iPhone is dead and not working at all, and you want to learn how to recover data from dead iPhone, this blog is exclusively for you.

Why would an iPhone suddenly go dead?

These are the possible reasons why iPhone turns dead or blank for hours:

1. A defective charging cable or adapter that doesn’t perfectly pair with your iOS device.
2. A recent iOS update that triggered some unforeseen software error in your iPhone.
3. Faulty or failed hardware, like a battery or a logic board that needs to be replaced.

In either of the above-mentioned conditions, your iPhone will stop responding to any command. Turning the device off and restarting works in rare circumstances, but not always. In such bleak situations, you can try to fix your dead iPhone using these tips:

• Keep a close watch over the charging cable or power adapter and fix the loose ends.
• Put your dead iPhone on charge for at least an hour.
• Connect your iPhone to iTunes or put it on Device Firmware Update (DFU) mode.
• Seek immediate assistance from Apple Support Services.

If these attempts won’t bring your iPhone back to life, certainly it has some major technical glitch that only Apple experts can address. Before submitting your device for the same, recover all the data stored in it. Follow these DIY solutions to recover data from dead iPhone:

Use iTunes to Recover Data from Dead iPhone

iTunes is one of the most coveted options to recover data recovery from dead iPhone. However, to use this method, your iPhone should be in sync with iTunes, and you have to periodically take data backup on it. Observe the steps to keep data backup on iTunes:

• Connect your iPhone to your computer and open iTunes to login.
• From the menu bar at the top of the iTunes window, select File > Library > Organize Library.
• Next, select Consolidate files to organize the Library screen and press OK.
• Once you do that, copies of any files that were not in the iTunes Media folder will be added to your iTunes Media folder.
• At the same time, take the opportunity to eliminate all the duplicate files taking unnecessary space on your hard drive. However, before making this move, save a copy of the original files in your iTunes Media Folder.

If you have been practicing the above steps for long, then simply connect your device with your computer using a USB cable and follow steps to recover data from iTunes backup:

• Connect your iPhone to your computer and open iTunes.
• Select your iPhone in the main iTunes window or select it from Finder.
• The move will prompt a new set of instructions on iTunes with options to backup data. You need to click on Restore Backup to retrieve your dead iPhone’s data.
• Several backup options will prompt on your computer. You can choose a selected set of files to restore a specific file or all of them.
• Once selected, the desired number of files/data to restore, press Restore, and wait. The move may restart your iPhone. If not, your device will suffer a more serious hardware failure that only technical experts can fix.

Pro Tip: If found dead, let your iPhone remain off for as long as possible to avoid data overwriting.

Use iCloud to Recover Data from Dead iPhone

If you are proactively using iCloud to maintain data backup, there is a fair chance to recover your dead phone’s data from it. You can directly recover data from iCloud on another iPhone that doesn’t necessarily require connection to a laptop or computer. All you need is an iPhone that can be turned on at least and let you through the initial steps to login to your iCloud. Don’t forget to erase your dead iPhone before continuing on the new one; otherwise, you won’t get to perform the initial set-up. Follow the steps below to restore dead iPhone’s data from iCloud Backup:

• Turn on the working iPhone and perform the initial setup procedures till you get through Apps & Data. Tap on Restore from iCloud Backup option and sign in with your Apple ID.

• A window will prompt you with all backups available for restoring. Select the most recent one that contains all the data you wish to retrieve from your dead iPhone.
• Patiently wait for the data transfer procedure to finish.
• In the data transfer procedure, at some point, you might be asked to enter your Apple ID once again. Enter details to keep the action going.
• Once done, you’ll get a notification of successful data transfer.

You can also transfer all your dead iPhone data to a new one by inserting its SIM card in the new iPhone. Learn here how to Transfer Data from Old iPhone to New iPhone .

Use a Reliable Data Recovery Software

Your last respite is a professional data recovery software in case a vast amount of data from dead iPhone, like photos, videos, messages, contacts, etc., remain missing after iCloud recovery. We recommend Stellar Data Recovery for iPhone because it guarantees absolute recovery of lost or deleted data from iPhone, iTunes, and iCloud. Listing some common situations where the software can help:

• If iTunes fails to restore data after unlocking the disabled iPhone.
• If some data is found missing after restoring data from iTunes or iCloud.
• Instead of restoring all files from the iPhone, you wish to recover only some selected files.

You can download the demo version of the software for assessment and buy the software to activate its key functionalities. It will activate via activation key that will be sent on your email once you purchase the software. Read this KB to learn How to Activate Stellar Data Recovery for iPhone . Additionally, using the Toolkit version of the software, identified as Stellar Eraser for iPhone , you can permanently remove all the sensitive data stored in your dead iPhone so it won’t fall into the wrong hands.

Conclusion:

Avid iPhone users know when to stop playing with their iOS device to let it reset in case of a technical glitch. Nevertheless, not all iPhone users are aware of this practice. Consequently, we panic and keep on switching off and on our smartphones when it hangs.

If your phone turns blank or dead, don’t panic and stop using your device for some time. Let it rest and resume its function. Otherwise, you’ll end up losing all the memories stored in it. This blog aimed to help you understand the grim consequences and smart ways to recover data from iPhone if your device turns dead. In case you are unable to recover data on your own using Stellar Data Recovery for iPhone, you can avail Data Recovery Lab-Services where our experts can recover all the data from your dead iPhone.

FAQs:

What to do if iPhone is not working?

If your iPhone has stopped responding to any command and you can’t even turn it off, then force shutdown and restart it. Swiftly press and release the volume up button first and repeat the same with volume down button. Now, press and hold the side button and once the Apple logo appears on the screen, release the side button too.

Why is my phone unresponsive?

Your iPhone’s touchscreen can be unresponsive for reasons like a brief hiccup or glitch that your smartphone’s inner system can’t detect or render it unresponsive. Sometimes, touch screen becomes unresponsive due to water damage or app glitch, or virus attack.

Why did my iPhone screen go black?

In iPhone, black screen appears due to software or hardware issues. Firmware modifications, dropping the iPhone, iOS upgrade/downgrade, and jailbreaking, are some other common reasons behind the black screen error. Learn some great solutions to overcome the black screen of death error .

How to Restore iPhone from Backup when iTunes Backup is Corrupt or not compatible

Summary: Are you receiving the error, ‘iTunes backup was corrupt or not compatible’ while trying to restore iPhone? iPhone recovery is not possible from a corrupt backup file. This post shares how you can resolve corrupt iTunes backup file issue and restore iPhone’s lost data.

‘I dropped my iPhone and broke it. I got it repaired and formatted to factory settings to fix the various issues caused due to the fall. Since I had a backup in iTunes, so was not worried about my data. But had least idea that my iTunes backup file was corrupted! As I tried to restore iPhone from iTunes, a message appeared –: ‘iTunes backup was corrupt or Not compatible.’ Now I don’t know how to restore my iPhone. Please help.’ –  Simon, UK

It’s not new when users get bowled over by iTunes when trying to restore their iPhone. iTunes sometimes shows a message that it could not restore iPhone because the backup was corrupt or not compatible with the iPhone that was being restored.

It may be because iTunes does incremental backup by updating the previous backup. It’s possible that some old backup data was corrupt, which results in the error message.

Whatsoever, it’s a fact that there’s no recovery possible from a corrupt backup file.

So how to fix such corrupt iPhone backup in iTunes and restore iPhone in such cases?

Here we share the best ways to fix corrupt iTunes backup file and efficient methods to restore iPhone’s lost data.

You can apply these methods on all iPhone models including series of iPhone 15, 14, 13, 12, 11, XS, XS Max, XR, X, 8 Plus, 8, 7 Plus, 7, 6S Plus, 6S, 6 Plus, 6, 5S, 5c, 5, 4S and 4 with latest iOS 16.x.

What you can do to fix ‘iTunes backup was corrupt or Not compatible’

Since you can’t repair or recover from a corrupt or incompatible iTunes backup file, it is best to delete such corrupt files and next try to create a new backup in iTunes.

How to delete your corrupt iPhone backup file in iTunes

1. Launch iTunes on your PC or Mac
2. Windows users click Edit > Preferences (on Windows PC). Mac users click iTunes Menu > Preferences
3. Select Find your iPhone backups
4. Select the corrupt or incompatible backup. Click Delete Backup
5. Close the iTunes Preferences window

How to delete the old iTunes backup files manually

If you don’t see the old backup in iTunes, then delete the backup manually.

1. In iTunes, under Summary click on Serial Number. You will see the iPhone’s UDID. Note it down.
2. Navigate to the iTunes backups folder on your computer.

On Mac follow: Finder > Option> Go menu> Library> Application Support >MobileSync> Backup

On Windows 11/10/8 follow: In Search box type %appdata%\Apple Computer\MobileSync\Backup. Press Enter key

If you installed iTunes from the Microsoft Store, follow: In Search box type %userprofile%\Apple\MobileSync\Backup. Press Enter key.

3. You will see the backup folders named by your device UDID
4. Select the folders with your device UDID and delete them
5. Next go to iTunes and take the backup again

How to backup iPhone in iTunes again

1. Connect your iPhone to computer via lightning cable
2. Launch iTunes
3. Click on Back Up Now The backup process begins.

| Did you get a message — iTunes can’t back up your iPhone because an error occurred? Here’s what you should do…
• Update your iOS to the latest version
• Update your iTunes to the latest version
• Disable antivirus software on your computer
• Now create backup in iTunes

|
| — |

How to restore iPhone when iTunes backup file is corrupt

Method 1: Restore iPhone from iCloud backup

Method 2: Recover from iCloud backup without erasing existing data

Method 3: Restore lost data directly from iPhone/ iPad

Method 1: Recover from iCloud backup

Instead of iTunes, you can restore iPhone by using the alternative backup solution, iCloud.

Steps to restore iPhone with iCloud

• Click to follow Settings > General > Reset> Erase all Contents and Settings

• A dialog box pops up, choose Erase Now
• Follow the instructions until you get on to the Apps & Data screen
• Tap Restore from iCloud Backup

• Sign in to your iCloud account
• Choose the recent backup and click Restore

Method 2: Recover specific files from iCloud without losing existing iPhone data

In case you want to restore specific data from backup, instead of complete backup, use an iPhone recovery software.

Steps to restore specific files from iCloud:

• Download and launch Stellar Data Recovery for iPhone on your computer.

• Select Recover from iCloud Backup on main screen of software.

• Select what you want to recover. Click Next
• Enter the Apple ID and password
• Select the relevant iCloud backup and click Scan

• Select the data in the iCloud backup files list on left and preview

• Click Save
• In the dialog box select computer or iPhone to save the recovered data. To save directly onto your iPhone, connect your iPhone to the computer.

Method 3: Recover data from iPhone

If iTunes could not restore iPhone or iPad because the backup was corrupt and neither iCloud is able to restore backup, recover data from the device directly. You can easily restore lost photos, videos, messages, calendar, voice memos, Safari bookmarks, etc., with this method. It works in cases of broken/ water-damaged iPhone, factory reset, iOS crash etc.

Steps to recover lost data from iPhone/ iPad

• Connect your iPhone to computer
• _Launch Stellar Data Recovery for iPhone _
• On the home screen select Recover from iPhone

• Select the data you want to restore
• Click Next

• Preview the data and click Save. You can save the recovered data on computer or iPhone

Conclusion

You cannot repair or recover data from corrupt iTunes backup file that gives — ‘iTunes backup was corrupt or Not compatible’ message.

However, the situation can be tackled by deleting the corrupt backup file and creating a fresh new backup in iTunes.

To restore iPhone, you may use either the new iTunes backup or bypass iTunes by using alternative recovery methods. Other than iTunes, iCloud or Stellar Data Recovery for iPhone are the effective ways to restore lost data on your iPhone. Among these too, if you wish to restore specific data like photos, videos, voice memos, or contacts etc., Stellar Data Recovery for iPhone would be the best solution.

How to Reset iPhone without Losing Data?

Summary: Sometimes, resetting an iPhone is essential to fix minor issues like iPhone crashing, freezing, or getting stuck at the Apple logo. But the iPhone reset process can delete important data and settings on your device. Read this post to learn smart ways to reset your iPhone without data loss. Moreover, you can also download this quick tool to reset your iPhone without losing data.

“Yesterday, my iPhone stopped working suddenly. I have been trying multiple ways to fix it since then; even tried the force reboot method. Should I simply reset my iPhone? How do I do it without losing my device data?”

Resetting an iPhone can sometimes become a necessity, whether due to sudden freezing up of your device, software glitches, or slow performance. Often, when your iPhone gets stuck on the Apple logo or suddenly crashes, you can reset your iPhone to fix this minor issue.

A factory reset is also necessary if you want to sell your iPhone and want to start fresh. When resetting your iPhone, it will become an empty slate with no pictures, contacts, videos, downloaded applications, playlists, or anything else. An iPhone reset restores your iPhone to its initial configuration and original factory settings.

However, be careful with this method as resetting your iPhone deletes all files & settings on the device.  For those looking to reset iPhone without losing their precious data, this blog is the answer. Let’s read on to find some simple ways to do so while keeping our data intact.

How to reset your iPhone without Losing Data?

Before starting, it’s crucial to back up your iPhone data to avoid losing important files and folders. You can back up your iPhone using iCloud, iTunes, or Finder on Mac or PC.

Next, follow the step-by-step instructions on resetting an iPhone using iPhone Settings, iPhone erasure software, and iTunes.

Method 1: Reset iPhone Without Losing Data via Settings

To reset iPhone without losing data, you need to use the ‘Reset’ feature in your iPhone. This feature has different options on how you would like to reset- whether through the ‘Reset All Settings’ or the ‘Reset Network Settings’ option.

The Reset All Settings option will remove or reset privacy settings, keyword dictionary, location settings, etc., to default. At the same time, Reset Network Settings will remove previously used networks and VPN settings. Resetting the Network Settings will turn off the cellular data roaming and remove previously used Wi-Fi settings of your iPhone.

Moreover, no data or media is deleted from iPhone when choosing the Reset All Settings or Reset Network Settings option.

Steps to Reset iPhone Using the ‘Reset All Settings’ option

• On the iPhone, navigate to Settings > General.
• Tap on Transfer or Reset iPhone.
• Click Reset options.

• Next, click the Reset All Settings option.
• Then enter the iPhone passcode.
• Now, click Reset All Settings. This process will take a couple of minutes to reset the privacy settings, keyword dictionary, location settings to default, but will keep the rest of your data fully secure.

Method 2: Reset iPhone via Stellar Toolkit for iPhone Tool

Sometimes, the ‘Reset All Settings’ option doesn’t solve your iPhone issue. In such a case, try resetting the iPhone with the help of trusted software. Stellar Toolkit for iPhone  is a secure and professional tool that can help you reset your iPhone to fix various iOS issues without losing data.

Also, you can also use Stellar Toolkit for iPhone to fix iOS related issues like- iPhone crashing, stuck at the Apple logo, etc.

This tool’s ‘Repair iPhone’ feature will first download the fresh copy of the iOS version present in your device from the official website. Then it will install the freshly downloaded iOS version on your iPhone after removing the existing one from your device. The software will reset your iPhone, making it seem new without removing or deleting your data.

Stellar Toolkit for iPhone is compatible with the latest iPhone 14, 13, 12, and below series and even all iPad versions, such as iPad Air, iPad Mini, and others.

 

Step-by-Step: How to reset iPhone with Stellar Toolkit for iPhone:

Step 1: Download Stellar Toolkit for iPhone on your Mac or Windows PC and connect your iPhone to the system using a USB cable.

Step 2:  Select Repair iPhone module from the launch screen of the software.

Step 3: On the Repair iPhone screen, click the Next button.

Step 4: Click on the iPhone icon.

Step 5: Click the Download button to download the latest iOS or iPadOS version of the firmware file. If you have already downloaded the firmware before, select Import.

Step 6: After downloading the firmware file, click the Repair button to start repairing.

Step 7: Once you receive the message —The repairing process of the selected iOS device is completed, click OK.

Restart your iPhone to see if the iOS issues are resolved.

Method 3: Reset iPhone Without Losing Data via Recovery Mode

To reset your iPhone, you can use iTunes or Finder app. You need to use Mac or Windows PC to access the recovery mode of your iPhone and reset the device. This method will erase all your device data, so take a backup of your iPhone before proceeding.

Steps to reset iPhone via Recovery

• Open iTunes on your Mac or Windows system.
• Connect your iPhone to the computer and then put your iPhone into Recovery Mode .
• Once your device has entered the Recovery Mode, a message ‘you’re in Recovery Mode’ will pop up. Click OK.

• Click on your iPhone when it appears in iTunes, then click Summary.
• Now, select the “Restore iPhone” option on the right pane.

• Click Restore to confirm. It might take a while for your iPhone to reset; don’t disconnect your device from the computer until the reset process is completed.

• Once the restore process is complete, set up your iPhone as new or restore it from a backup.

Conclusion

You can factory reset your iPhone without fearing data loss by trying different methods mentioned in this blog. Reset All Settings/ Reset Network Settings feature of iPhone can reset your device; however, it may not always work. You can even use iTunes to reset your iPhone, but you will lose all your device data.

Or use the ‘Repair iPhone’ feature of Stellar Toolkit for iPhone software to permanently reset your iPhone without losing data. This tool can repair iOS issues like iPhone crashing, Black Screen of Death, and iPhone stuck at the Apple logo.

Download the free trial version to evaluate the features of the software.

Click here

 [](https://cloud.stellarinfo.com/StellarToolkitforiPhone.exe) [](https://cloud.stellarinfo.com/StellarToolkitforiPhone.dmg.zip)

FAQs

How to remotely erase iPhone data?

If your iPhone is lost or stolen, you can protect your iPhone data from misuse by remotely erasing its data using the iCloud website.

How to restore or set up your iPhone after reset?

Use an iCloud backup to restore your iPhone after a factory reset.