How to Fix iPhone Stuck at ‘attempting data recovery’ Loop

Summary: If your iPhone gets stuck at ‘attempting data recovery’ loop screen while updating iOS, learn how to fix iPhone failed iOS update error and efficiently recover lost data using Stellar Data Recovery for iPhone.

Since the release of iOS 16, there are frequent complaints about flood updates leading to the ‘attempting data recovery’ loop. Moreover, users are concerned about data loss in such situations.

Users globally reported that their iPhone gets stuck in the ‘attempting data recovery’ loop while trying to install iOS updates. The issue occurs when they update to iOS 16 versions by using iTunes. It leaves the update in the lurch and erases some or all data from their iPhone.

iOS updates breathe new life into your device. However, the truth is that Apple’s every update brings some bug or new problem, like this one.

Read this post further if your iPhone screen gets stuck at the ‘attempting data recovery’ loop during an iOS update.

It shares how to fix iPhone ‘attempting data recovery’ failed problem and recover lost iPhone data in any case.

You can apply the methods on iPhone 14, 13, 12, SE, 11, XS, XR, X, 8, 7, 6, 5, and 4 series. They are relevant to iOS 16 and below versions.

Common causes of ‘attempting data recovery’ loop on iPhone

The attempting to data recovery failed problem usually occurs when iOS is updated with iTunes. The ‘attempting data recovery’ screen takes a long time and is often followed by a prompt ‘press home button to restore.’

Some of these occurrences were reported in the following scenarios:

• Users unplugged the iPhone from a PC or Mac during the update
• Downgrading from iOS 16 to 15 or below
• Updating iOS after jailbreak

How to fix iPhone stuck at the ‘Attempting Data Recovery’ loop

1. Force Restart iPhone
2. Put iPhone into Recovery Mode

Method 1: Force Restart iPhone

It’s essential to know that a force restart differs from a normal Restart. A force restart is advised when iPhone is not in its normal working condition. It is either hanged or stuck at the Apple logo or another screen in Recovery Mode or Restore Mode. It cuts the power and turns on the iPhone again. Force restart usually fixes many iPhone issues.

Steps to Force Restart iPhone 8 and earlier:

• Press and fast release the Volume Up button
• Press and fast release the Volume Down button
• Press and hold the Side button (power) until the Apple logo appears

Steps to Force Restart iPhone X and later:

• Press and quickly release the Volume Up button
• Press and quickly release the Volume Down button
• Press and hold the Side button until you see the recovery-mode screen.

Method 2: Put iPhone into Recovery Mode

If Force Restart doesn’t help, try this method. Recovery Mode helps in cases of failed iOS updates. Thus, whenever the iOS updates, the iPhone gets stuck at the ‘attempting data recovery,’ op put the device on Recovery Mode.

[Caution]: Recovery Mode erases the iPhone data, which can be restored with the help of iTunes backup. So, make sure that the iTunes version is the latest.

Steps to put iPhone on Recovery Mode:

1. Connect iPhone to computer
2. Open iTunes
3. Force restart iPhone (with steps mentioned above)
4. A dialog box appears. Select Update

5. After the Update process completes, set up your iPhone.

Fixed ‘attempting data recovery’ failed problem. Further, how to restore data on iPhone

Recovery Mode, though fixes iPhone’s ‘attempting data recovery’ issue but at the same time erases all information from the device. You can restore iPhone data from iTunes backup or iCloud backup.

In case, iTunes/iCloud backups are not able to restore iPhone or you discover that some of the data is still missing after restoring the device, choose Stellar Data Recovery for iPhone .

The software is also helpful when you don’t want to recover all the data from iTunes or iCloud unnecessarily. Instead, it. It lets you recover precisely what you want, by allowing you to choose specific files like photos, videos, WhatsApp chats, or memos, Calendar, etc., and restoring them on the device.

Additionally, Stellar Data Recovery for iPhone also restores the data lost and deleted after jailbreak, water damage, a Black screen of death, iPhone stuck at Apple logo , screen damage iPhone, factory reset, etc. It supports recovery from iPhone 15, 14, 13, 12, SE, 11, XS, XR, X, 8, 7, 6, 5, and 4 series.

Steps to Restore Data on iPhone with Stellar Data Recovery of iPhone

• Download Stellar Data Recovery for iPhone on PC/ Mac
• Connect iPhone to the computer
• Select iTunes from the software screen
• Follow the simple on-screen instructions

Wrapping Up

Users look forward to iOS updates. However, the experience can get irritating, when iPhone software updates fail. For example, iPhone ‘attempting data recovery’ loop is a common problem faced after attempts to upgrade to the latest iOS 16.

Force restart of the device often resolves the ‘attempting data recovery’ loop issue. If this doesn’t work, further try to get your iPhone on Recovery Mode. Later restore data via iTunes or Stellar Data Recovery for iPhone. The software approach is straightforward and lets you select and restore the informathat you want.

Guide to Completely Erase Data on iPhone to Avoid Privacy Leak

With growing instances of data leak and misuse, there’s a fear of digital data on iPhone landing in wrong hands. Personal photos, messages, videos, contacts, or sensitive information such as bank details, shopping apps ID etc., are at risk when selling, trading off, recycling or donating your iOS device.

So what can you do to keep your old iPhone data away from strangers’ eyes and make it 100% unrecoverable?

One solution is the commonly used Apple’s recommendation — erase iPhone data by choosing ‘erase all content and settings’ on your device. However, with professional hackers and sophisticated software available, erasing data by this method doesn’t guarantee data privacy.

Experts suggest using trusted iPhone erasure software that is 100 % safe. The software can make iPhone data unrecoverable beyond the reach of any tool.

Let’s understand in detail how to permanently erase data on iPhone by these techniques.

Clean iPhone by using ‘Erase All Content and Settings’

To clear all data from iPhone use the’Erase All Content and Settings’ option in the settings of your iOS device. It is like factory resetting your iPhone.

All the app data, settings, passwords, photos, videos, contacts, documents, messages, Calendar, chats, music, audio files etc., gets deleted after factory reset from iPhone.

However, don’t forget to first take the backup of your iPhone data in iCloud or iTunes.

Steps to erase iPhone via Settings:

• Go to Settings.
• Navigate to General > Reset> Erase All Content and Settings.
• Click Erase Now in the dialog box. Enter Passcode and Apple ID password, when prompted.

This will erase iPhone data turning the device off. When you power on the iPhone, you will see all its data is deleted including, photos videos, apps, contacts etc.

Permanently wipe iPhone to 0% recovery – Secure & tested method

Although deleting data via ‘Erase All Content and Settings’ on iPhone will make your device as clean as new, but it is not enough. Your iPhone data after factory reset is still recoverable by hackers. Thus, to protect privacy and prevent data leak by any means, it is essential to erase iPhone with the help of a professional iOS eraser software .

You can find several iOS cleaner software online but here we recommend Stellar Toolkit for iPhone. The efficient software is the best way to wipe iOS device before you sell , recycle, or donate.

It removes your personal videos, pictures, contacts, notes, calendar, browsing history, call log, chats, messages, Instagram, WhatsApp, and other sensitive information saved on your iPhone. The secure DIY software supports the latest iOS 16 and below versions. You can erase all variants including iPhone 6, iPhone 7, iPhone 8, iPhone X, iPhone SE, iPhone 11, and above.

You can take the free trail and gage the software features and user-friendliness.

Step-by-step guide to erase iPhone data permanently:

Step 1: Download and launch Stellar Toolkit for iPhone on computer.

Step 2: Click on Erase Data module.

Step 3: On Erase iPhone Data screen, click **Next.
**

Step 4: As you see the Click Device to Select screen appears, connect your iPhone to computer.

Step 5: Select Erase.

Step 6: In the Erase Process box, select Yes.

Step 7: Data Erase Complete message box appears that asks for confirmation before erasing the data. Click OK.

Wrapping Up

After erasing complete iPhone data by using the secure iPhone eraser software by Stellar, there’s no need to worry about personal data leak. The software algorithms ensure that even the most advanced iOS data recovery tool cannot retrieve your information.

---

Was this article helpful?

FAQs

How do you permanently erase data so that it cannot be recovered from iPhone?

Use the best iPhone data eraser tool to permanently wipe iPhone data. This is a assure way to prevent data leak and protect privacy.

Click here

## 7 Ways to Fix iTunes Error 9

Summary: The iTunes error 9 appears when iPhone update through iTunes gets failed. It’s annoying as the error doesn’t let you use your device further. Learn 7 quick methods to fix iTunes error 9 and update the device without any issue.

Trying to get the new iOS on your iPhone but facing iTunes Error 9?

The iTunes error 9 usually occurs while updating your iPhone via iTunes. The error annoyingly neither lets you update the iPhone nor do any activity on your device. Thus, it urgently requires a fix so that you can work on your iPhone and also update the device.

In this post, we will share with you 7 best possible ways to fix iTunes Error 9. But before that let’s know what is causing the iTunes error on trying to update your iPhone.

Why does iTunes Error 9 occur?

It is difficult to determine the exact reason of your iTunes Error 9. But it may be due to any of the reasons given below :

• USB port or cable is damaged
• You have jailbroken your iPhone
• Corrupt network settings
• Security software prevents access to Apple server

How to fix iTunes error 9?

Since it is usually, regarded as a hardware issue, you should begin with hardware-related workarounds and later move to other software troubleshooting methods.

Going by the order, try below methods to fix iTunes Error 9

1. Check USB cable & port
2. Restore iPhone with iTunes on another computer
3. Force your device to restart
4. Check Anti-Virus & Firewall on your computer
5. Update iTunes to the latest version
6. Use Recovery Mode to Fix iTunes Error 9
7. Choose to update iPhone wirelessly

Solution 1: Check USB cable and port

Make sure your iPhone USB cable and port are properly connected and working fine. Do the below checks and fix:

• USB cable is not loosely connected to the computer
• You are using the USB cable that you got with your iPhone or another certified cable
• The USB port is not damaged. Try by shifting to another USB port

Solution 2: Restore iPhone with iTunes on another computer

iTunes error 9 is generally regarded as a hardware-related problem. Sometimes it is difficult to detect the issue. The easier way out is to restore iPhone using iTunes on another computer or laptop. If still the error persists, move on to the other workarounds.

Solution 3: Force restart your device

Apple suggests trying once force a restart of iPhone to fix iTunes error 9.

iPhone X, iPhone 8, & iPhone 8 Plus users: Press and quickly release the Volume Up button. Press and quickly release the Volume Down button. Then, press and hold the Side button until you see the Apple logo.

iPhone 7 & iPhone 7 Plus users: Press and hold both the Side and Volume Down buttons for at least 10 seconds, until you see the Apple logo.

Solution 4: Check Anti-Virus & Firewall on your computer

Antivirus or Firewalls in your computer may prevent iTunes to connect with Apple server.  Check the security software settings, and tweak them if required to allow iTunes to access the network servers.

Solution 5: Update iTunes to the latest version

Updates usually bring in new features, fix existing bugs and make the application smarter. If the iTunes error 9 is due to outdated iTunes, installing the latest version may help to fix the error.

How to update iTunes to the latest version?

For Windows users: Launch iTunes on PC. On the menu bar, click Help > Check for Updates and follow the given instructions

For Mac users: Launch iTunes on Mac. On Menu bar go to iTunes > Check for Updates and follow the on-screen instructions.

After updating iTunes, reboot your computer and check if the iTunes error 9 is fixed.

Solution 6: Use Recovery Mode to fix iTunes Error 9

iPhone in Recovery Mode

All the above methods fail to fix iTunes error 9? As last resort choose Recovery Mode to restore iPhone in iTunes. Choosing this option means you will lose all your iPhone data. Thus, first take backup in iCloud or iTunes before applying this fix.

How to put your iPhone into Recovery Mode? (For iPhone 8, 8 Plus, & X users)

• Update your iTunes
• Press and release the Volume Up button and then the Volume Down button
• Press and hold the Side button till connect to iTunes screen appears
• Once the iPhone is in Recovery Mode, connect your computer with iPhone via USB cable. You will see the white Apple logo screen.
• When iTunes asks you to update or restore, click Update to reinstall iOS

Lost iPhone data after restoring iPhone in iTunes via Recovery Mode?

Losing iPhone data after update through Recovery mode is a panicky situation. It gets even more serious if you are unable to restore from iCloud or iTunes backup. In such situation, Stellar Data Recovery for iPhone comes as big relief**.** The software restores complete iPhone information from iPhone, iCloud and iTunes.

Stellar iPhone data recovery software quickly and safely restores all iPhone data including photos, videos, music, contacts, messages, Safari bookmarks, etc. It also recovers the lost WhatsApp, WeChat, Line, Viber, Tango, and Kik messages. The software is extremely easy to use. Simply launch it on your Mac or PC, connect your iPhone to the computer and follow the on-screen instructions.

 

Solution 7: Choose to update iPhone wirelessly

Select Software Update in Settings on iPhone

Alternatively update iPhone wirelessly, without using iTunes.  Make sure you have a continuous Internet connection. Go to Settings > General > Software Update. If an update is available, tap on Download and Install.

Conclusion

Although iTunes Error 9 rarely occurs but is a frustrating situation as you are unable to do any other activity on your device.

You can sometimes easily fix the Error 9 by doing a simple check if your USB cable, port connection, and firewall settings are appropriate. Restarting the device and updating iTunes to the latest version can also resolve Error 9. As a last resort, update iOS in iTunes through Recovery Mode. Nevertheless, you can also choose to bypass iTunes and update your device wirelessly.

One of the above methods is surely going to help you out. Also do not forget to share with us in the comment box below, which of these methods helped you to fix iTunes Error 9.

How to Restore iPhone from Backup when iTunes Backup is Corrupt or not compatible

Summary: Are you receiving the error, ‘iTunes backup was corrupt or not compatible’ while trying to restore iPhone? iPhone recovery is not possible from a corrupt backup file. This post shares how you can resolve corrupt iTunes backup file issue and restore iPhone’s lost data.

‘I dropped my iPhone and broke it. I got it repaired and formatted to factory settings to fix the various issues caused due to the fall. Since I had a backup in iTunes, so was not worried about my data. But had least idea that my iTunes backup file was corrupted! As I tried to restore iPhone from iTunes, a message appeared –: ‘iTunes backup was corrupt or Not compatible.’ Now I don’t know how to restore my iPhone. Please help.’ –  Simon, UK

It’s not new when users get bowled over by iTunes when trying to restore their iPhone. iTunes sometimes shows a message that it could not restore iPhone because the backup was corrupt or not compatible with the iPhone that was being restored.

It may be because iTunes does incremental backup by updating the previous backup. It’s possible that some old backup data was corrupt, which results in the error message.

Whatsoever, it’s a fact that there’s no recovery possible from a corrupt backup file.

So how to fix such corrupt iPhone backup in iTunes and restore iPhone in such cases?

Here we share the best ways to fix corrupt iTunes backup file and efficient methods to restore iPhone’s lost data.

You can apply these methods on all iPhone models including series of iPhone 15, 14, 13, 12, 11, XS, XS Max, XR, X, 8 Plus, 8, 7 Plus, 7, 6S Plus, 6S, 6 Plus, 6, 5S, 5c, 5, 4S and 4 with latest iOS 16.x.

What you can do to fix ‘iTunes backup was corrupt or Not compatible’

Since you can’t repair or recover from a corrupt or incompatible iTunes backup file, it is best to delete such corrupt files and next try to create a new backup in iTunes.

How to delete your corrupt iPhone backup file in iTunes

1. Launch iTunes on your PC or Mac
2. Windows users click Edit > Preferences (on Windows PC). Mac users click iTunes Menu > Preferences
3. Select Find your iPhone backups
4. Select the corrupt or incompatible backup. Click Delete Backup
5. Close the iTunes Preferences window

How to delete the old iTunes backup files manually

If you don’t see the old backup in iTunes, then delete the backup manually.

1. In iTunes, under Summary click on Serial Number. You will see the iPhone’s UDID. Note it down.
2. Navigate to the iTunes backups folder on your computer.

On Mac follow: Finder > Option> Go menu> Library> Application Support >MobileSync> Backup

On Windows 11/10/8 follow: In Search box type %appdata%\Apple Computer\MobileSync\Backup. Press Enter key

If you installed iTunes from the Microsoft Store, follow: In Search box type %userprofile%\Apple\MobileSync\Backup. Press Enter key.

3. You will see the backup folders named by your device UDID
4. Select the folders with your device UDID and delete them
5. Next go to iTunes and take the backup again

How to backup iPhone in iTunes again

1. Connect your iPhone to computer via lightning cable
2. Launch iTunes
3. Click on Back Up Now The backup process begins.

| Did you get a message — iTunes can’t back up your iPhone because an error occurred? Here’s what you should do…
• Update your iOS to the latest version
• Update your iTunes to the latest version
• Disable antivirus software on your computer
• Now create backup in iTunes

|
| — |

How to restore iPhone when iTunes backup file is corrupt

Method 1: Restore iPhone from iCloud backup

Method 2: Recover from iCloud backup without erasing existing data

Method 3: Restore lost data directly from iPhone/ iPad

Method 1: Recover from iCloud backup

Instead of iTunes, you can restore iPhone by using the alternative backup solution, iCloud.

Steps to restore iPhone with iCloud

• Click to follow Settings > General > Reset> Erase all Contents and Settings

• A dialog box pops up, choose Erase Now
• Follow the instructions until you get on to the Apps & Data screen
• Tap Restore from iCloud Backup

• Sign in to your iCloud account
• Choose the recent backup and click Restore

Method 2: Recover specific files from iCloud without losing existing iPhone data

In case you want to restore specific data from backup, instead of complete backup, use an iPhone recovery software.

Steps to restore specific files from iCloud:

• Download and launch Stellar Data Recovery for iPhone on your computer.

• Select Recover from iCloud Backup on main screen of software.

• Select what you want to recover. Click Next
• Enter the Apple ID and password
• Select the relevant iCloud backup and click Scan

• Select the data in the iCloud backup files list on left and preview

• Click Save
• In the dialog box select computer or iPhone to save the recovered data. To save directly onto your iPhone, connect your iPhone to the computer.

Method 3: Recover data from iPhone

If iTunes could not restore iPhone or iPad because the backup was corrupt and neither iCloud is able to restore backup, recover data from the device directly. You can easily restore lost photos, videos, messages, calendar, voice memos, Safari bookmarks, etc., with this method. It works in cases of broken/ water-damaged iPhone, factory reset, iOS crash etc.

Steps to recover lost data from iPhone/ iPad

• Connect your iPhone to computer
• _Launch Stellar Data Recovery for iPhone _
• On the home screen select Recover from iPhone

• Select the data you want to restore
• Click Next

• Preview the data and click Save. You can save the recovered data on computer or iPhone

Conclusion

You cannot repair or recover data from corrupt iTunes backup file that gives — ‘iTunes backup was corrupt or Not compatible’ message.

However, the situation can be tackled by deleting the corrupt backup file and creating a fresh new backup in iTunes.

To restore iPhone, you may use either the new iTunes backup or bypass iTunes by using alternative recovery methods. Other than iTunes, iCloud or Stellar Data Recovery for iPhone are the effective ways to restore lost data on your iPhone. Among these too, if you wish to restore specific data like photos, videos, voice memos, or contacts etc., Stellar Data Recovery for iPhone would be the best solution.