How to fix Microsoft Excel not responding error and save your data

Summary: This guide helps you resolve Excel not responding and frequent Excel freeze issues in Excel on Windows 10. It mentions some effective solutions to repair Excel and resolve Excel is not responding problem. These solutions will also help you fix Excel crashing problem while working on the spreadsheet.

Similar to any other program, you may experience problems with Microsoft Excel while opening or working on a document. Sometimes, it may not start at all or freeze and display an error message such as ‘Excel is not responding’. When it happens, you may want to wait for the program to respond.

‘Microsoft Excel is not responding’ problem

Tip: If you are experiencing Excel not responding problem with a particular Excel file, it’s quite possible that the file is corrupt or partially damaged. And thus, leading to an Excel freeze or crash problem. Use Stellar Repair for Excel software to quickly repair and restore Excel (.xls/.xlsx) file in its original, intact form. You can download the free trial version of the software from the below link.

But if Excel doesn’t respond after a while and remains stuck, you need to force close the program from “Task Manager”. Now, this could be disastrous if happens while you are working on an important Excel document that took you hours to prepare. Force closing Excel due to such error can damage the Excel document and it may fail to open next time.

Why Excel is Not Responding?

Excel may stop responding, freeze, or crash suddenly due to several reasons. It can happen while saving a spreadsheet or opening an Excel document. It may also occur while editing or inserting images, graphs, etc. But usually, it occurs when the system crashes or shuts down abruptly while you are working on a document. Here’s an instance,

Suppose, you worked overnight on a critical document which is to be presented at a meeting the next day. This Excel spreadsheet includes critical graphs and charts, and much more. When you are about to save it, there is a power failure, and your system shuts down without warning. When the power is up, you restarted the system to check your Excel. To your dismay, a message pops up – “Excel Crashed” or “Microsoft Excel not responding”.

This could be frustrating. However, there is no need to despair as there are solutions to not just overcome this error but other corresponding issues such as Excel freezing, hanging, crashing, etc. Below is an infographic that quickly briefs all the possible solutions to fix Excel not responding error.

Solutions to Fix ‘Microsoft Excel is not responding’ Error

Follow the solutions discussed below in the given order to fix Excel freezing and hanging issues.

Solution 1: Open Excel in Safe Mode

If Excel is not working as intended and frequently stops responding, you may try to start Excel in Safe Mode. It is a common DIY way to fix ‘Excel is not responding’ problem.

In Safe Mode, Excel starts with only essential services, bypasses certain functionalities and doesn’t load the add-ins, which might be the reason behind the error in MS Excel . To open and troubleshoot Excel in Safe Mode:

• Press Windows + R keys, type excel.exe /safe and press ‘Enter’ or click ‘OK’

MS Excel in Safe Mode

Open the Excel file and check if it still crashes. If not, the problem could be a faulty add-in or formatting and styling error.

Proceed to the next solution to check and fix the problem.

Solution 2: Check for Faulty and Unwanted Add-ins

In Microsoft Excel, there are two types of add-ins:

• COM add-ins
• Other Add-ins Installed as XLAM, XLA, or XLL File

Both types of add-ins can cause the freezing problem in Excel . Follow the steps below to disable unwanted and faulty add-ins:

• In Excel , click File and go to Options to open ‘Excel Options’ window
• Click Add-ins button to view and manage ‘Microsoft Office Add-ins’
• Uncheck required add-ins to disable them
• At this stage, you can also click the ‘Remove’ button to remove any unwanted add-ins

Disable COM Add-Ins

• Now enable an add-in and check the Excel performance. Observe Excel for not responding error or freezing problem

If Excel doesn’t freeze, enable subsequent add-in and then again use Excel to observe it. Repeat the steps until you find the faulty plugin, which is causing the problem.

Then remove it from Excel add-ins to resolve the problem.

Solution 3: Install the latest Windows and Office Updates

This problem may also occur if Windows and MS Office are not updated. Therefore, install the latest updates for both Microsoft Windows and Microsoft Office.

You can set the installation and update option to ‘Automatic mode’ in Windows. This will download and install critical updates for MS Office, which might fix the Excel performance issue. The steps to enable automatic updates are as follows:

1. Go to Settings> Update & Security> Windows Update

Enable Automatic Windows updates

• Click Advanced options and enable all the toggle switches to automatically download and install updates for Windows and other Microsoft products

Update Microsoft Products

After update, restart Excel and check if the problem is resolved.

NOTE: From now on, MS Excel will also get the latest update consistently, without the need for manual intervention.

Solution 4:  Check and Disable Anti-virus

Antivirus is important for device safety. However, if your antivirus conflicts with MS Office apps such as Excel, it could lead to Excel freezing and not responding errors.

To check if the problem is due to anti-virus, disable it and reopen the Excel document. Check if Excel performs well or if it still hangs.

Example of Antivirus conflict with Microsoft Excel

If the problem is resolved, contact your antivirus software provider for help to keep antivirus running without affecting the system and other programs such as MS Excel.

Solution 5: Change the ‘Default Printer’

Although it may seem irrelevant, changing the default printer is another easy and effective solution to overcome the error. Reason being, Excel communicates with the printer to find supported margins when we open an Excel sheet.

If Excel doesn’t find the supported margin, it may stop responding or crash. The steps to change the default printer are as follows:

1. Open Control Panel on your Windows system
2. Click Printer and Devices
3. Right-click Microsoft XPS Document Writer to set it to the default printer

Change in Default Printer Setting

Reopen the Excel document to check whether the error occurs or not.

Solution 6: Repair Microsoft Office

A corrupt or damaged Microsoft Office can also cause the ‘Excel is not responding’ problem. You can resolve this by repairing the Microsoft Office files. The steps are as follows:

1. Close all running MS Office programs
2. Go to Control Panel on your Windows system
3. Click Programs and then Programs and Features
4. Select Microsoft Office and in the Microsoft Office window, click ‘Change’
5. Then select the ‘Repair’ option and click ‘Continue’

Repair MS Office

This may take a while. After the repair is done, check your Excel program and file for the error.

Solution 7: Remove and Reinstall Microsoft Office

Sometimes, repairing MS Office may not work. In such a case, removing and reinstalling Microsoft Office can resolve the ‘Excel is not responding’ problem. To do so, follow these steps:

1. Close all running MS Office programs
2. Go to Control Panel on your Windows system
3. Click Programs and then Programs and Features
4. Right-click on Microsoft Office and choose Uninstall

Uninstall MS Office

Then run the MS Office installation setup to re-install MS Office on your system.

Solution 8: Repair Microsoft Excel (XLS/XLSX) file

In several situations, a corrupt or partially damaged Excel (XLS/XLSX) file is the cause of this error. In such a case, you can download and install Stellar Repair for Excel to repair the corrupt or damaged Excel file. By repairing the Excel file, you can resolve the Excel freezing error quickly without applying much efforts.

The steps to use the software for Excel file repair are as follows:

1. Download, install and launch the Excel file repair software
2. Browse and select the corrupt Excel file

• Click ‘Repair’ to start repairing the damaged Excel file
• After file repair, it provides a preview. Check your file

• Then click the ‘Save File’ option in the main menu
• You can either choose default location or browse a new folder location to save the repaired Excel file

• After repair, open the file in Excel and continue with your work

And keep Stellar Repair for Excel installed on your system. You never know when you might need this handy tool.

You may also refer to Microsoft support for more details on Excel not responding, hangs, freezes or stops working issues.

Conclusion

Now that the methods for fixing the ‘Excel is not responding’ error are before you, try all these and see which one works for you. If the cause of this error is a damaged or corrupt Excel file, only repairing the XLS/XLSX file can resolve the issue.

For this purpose, it’s recommended to use a reliable software such as Stellar Repair for Excel as it offers an easy-to-use interface, thereby making Excel file repair process a seamless experience.

The software recovers table, chart, chart sheet, cell comment, number, text, shared formulas, image, formula, sort and filter, and other objects. It also preserves worksheet properties, layout, and cell formatting. It can repair multiple XLS/XLSX files simultaneously and fix all Excel file corruption errors.

All these features extend the software capabilities beyond just fixing the ‘Excel not responding’ error.

Solved - The File is Corrupted and Cannot be Opened - Excel

Summary: Unable to open Excel file due to the error ‘The file is corrupted and cannot be opened’? Read this blog to find more details about the error, possible reasons behind it, and solutions to fix the error. In addition, the blog mentions about Stellar Repair for Excel software that can help fix the Excel error in a few clicks. Download the software now and see free preview of the file.

About the Error

Microsoft Excel is a widely used spreadsheet application that comes bundled with MS Office. Users tend to update the application with new security patches and features. Sometimes these updates can cause problems, and result in “The file is corrupted and cannot be opened” error.

Figure 1 – Excel File Corrupted Error Message

Other Possible Reasons behind ‘The File is Corrupt and Cannot Be Opened’ Excel Error

• Opening an older Excel version file in a newer version of Excel. For instance, opening Excel 2013, 2010, or earlier versions in Excel 2016.
• When attempting to open a Microsoft Office (Excel) email attachment in Microsoft Outlook 2010, MS Office 2010 reports a problem with the file preventing it from opening.

How to Fix the ‘Excel File is Corrupt and Cannot Be Opened’ Error?

Here are a few possible solutions that you can try to fix the ‘Excel file is corrupt and cannot be opened’ issue and open your Excel file.

Solution 1: Changing Component Services Settings

Solution 2: Changing the Protected View Settings

Solution 3: Repair Excel Files using Excel Repair Software

Solution 1: Changing Component Services Settings

[Caution] Changing Component Services settings requires making changes to the registry, and any mistake can harm your computer.

Follow these steps to change ‘Component Services’ settings:

• Click ‘Start’ or ‘Win+R’ and type ‘dcomcnfg’ and press ‘Enter’.

• In the navigation pane, expand the ‘Component Services’, and then expand ‘Computers’.

---

Figure 2 – Component Services Settings

• Next, right-click on ‘My Computer’, and then click ‘Properties’.

When the ‘My Computer Properties’ dialog box appears, click on the ‘Default Properties’ tab and then set the following values:

• Default Authentication Level: Connect
• Default Impersonation Level: Identify

Figure 3 – Illustrates My Computer Properties

• Click ‘OK’ to change ‘Default Properties’

Solution 2: Changing the Protected View Settings

[Caution] Disabling the ‘Protected View’ can put your system at high risk. Viruses attached to the Excel files can attack and infect your system. Be careful before using this option.

Excel 2010 file cannot open due to the ‘Protected View’ setting in Microsoft Outlook 2010. And so, changing the setting may help fix the error. For this, perform these steps:

• Open MS Excel 2010, go to the ‘File’ menu and click ‘Options’.

Figure 4 – Options

• When the ‘Excel Options’ window opens, click on ‘Trust Center’ and then on ‘Trust Center Settings’.

Figure 5 – Open Trust Center Settings

• Next, choose ‘Protected View’ and uncheck all the options including ‘Enable Protected View for Outlook attachments’ if you use Outlook for email.

Figure 6 – Uncheck Protected View Settings

• Click ‘OK’. Restart the application and try opening the Excel file again.

If none of the above solutions works for you, your Excel file is likely severely corrupt. To repair corrupt Excel files, you need to use advanced options like Stellar Repair for Excel tool. It repairs corrupt and damaged Excel files and helps in retrieving lost data.

Solution 3: Use Excel File Repair Tool

Considering the risks associated with the above solutions, it’s better to use an Excel repair tool to repair single or multiple corrupt Excel files at once. The process is simple, and even a novice can use the Excel file repair tool to repair Excel files with the help of the following steps:

• Download Stellar Repair for Excel and install it.

• Launch the tool. In the tool’s main interface, click ‘Browse’ to select the file. If you don’t know the file location use the ‘Search’ option.

Figure 7 – Illustrates Selecting Corrupt Excel File in Stellar Repair for Excel

• Select the file, and then click on Repair.

Figure 8 – Illustrates Initiating Excel File Repair in Stellar Repair for Excel

• The software scans and lists the Excel file in the left pane. Click on the file to preview its recoverable objects in the right pane.

Figure 9 – Illustrates Preview of Recoverable Excel File Objects

• Save the repaired file at either the default location or a user-specified location.

Figure 10 – Illustrates Saving Repaired Excel File in Stellar Repair for Excel

• Click ‘OK’ to save the repaired Excel file. After the repair process is completed, browse to the location and open it with MS Excel 2010 or any other version.

Figure 11 – Illustrates Saving Complete Message in Stellar Repair for Excel

You will be able to access your Excel file from the selected location.

Conclusion

You can use the first two possible solutions to fix the “The file is corrupted and cannot be opened” error. If you can access the file, save its data and restore the default settings. However, if the file is corrupt and the data retrieved using the first two solutions is inconsistent or incomplete, use Stellar Repair for Excel. This tool can help you recover Tables, Charts, Chart Sheets, cell comments, Images, and Formulas while preserving the worksheet properties and cell formatting. You can also preview the file and verify the data inside the file before saving it.

Solutions to open Excel Read Only Documents

‘Excel cannot open read-only documents’ is an error message that usually appears when you try to open an Excel (XLS or XLSX) file downloaded from the Internet, email, or the network server. It may also appear when you try to open an encrypted or password-protected Excel document. In such a case, MS Excel prevents the user from making any changes to the document.

Reasons behind the “Excel cannot access ‘xxx.xls.’ The Document may be read-only or encrypted” Error

There could be several reasons that may cause the error. Some of them are as follows:

• Corrupt or damaged Excel workbook
• Incompatible or unsupported add-in
• Antivirus or malware software conflict
• Read-Only Excel file
• The file is encrypted
• File or drive read/write permissions issues
• Protected Excel workbook
• Damaged or missing MS Office (MS Excel) program files

Solutions to Open and Edit Read-Only Excel Documents

Below are a few solutions that can help you fix the ‘Excel cannot access ‘xxx.xls.’ The Document may be read-only or encrypted’ error and allow you to open and edit Excel documents.

• Remove Read-only Attribute from Excel File Properties

The ‘Excel cannot open read-only documents’ error message may appear when the Excel file property is set to read-only. To check if this is the case, follow these steps:

• Right-click on the particular Excel (xls/xlsx) document and select ‘Properties’.
  • Uncheck the ‘Read-only’ attribute and then click the ‘OK’ button.

Now try to open the Excel document and check if the problem is fixed.

• Adjust Antivirus Settings

A few antivirus programs block Excel files and other Office documents by opening those in ‘read-only’ mode. In such cases, try adjusting the antivirus settings to open the Excel files normally. This will allow you to edit, modify, and save the Excel workbook without encountering the “Excel cannot access ‘xxx.xls.’ The Document may be a read-only or encrypted” error message.

• Disable Protected-View

The error may appear when you try to open an Excel file received as email attachments or downloaded from unsafe source. The file may potentially contain viruses, worms, or other types of malware that could damage the system or the server.

To safeguard the system, MS Excel opens such files in Protected View. It may also open an Excel workbook in Protected Mode when it detects a problem with the file. This security feature allows you to read or view Excel files and reduces the risks to the computer system or PC.

However, you can click File > Info and then click ‘Edit Anyway‘ to access and edit file content. You may also disable the Protected View setting via File > Options > Trust Center > Trust Center Settings…> Protected View. However, we do not recommend this.

• Renew/Activate Microsoft Office

If MS Office is in a deactivated state or its subscription has expired, the Office documents, including the Excel, could be in ‘read-only reduced functionality mode.’

In such a scenario, activate Microsoft Office or renew the Office subscription. Then open the Excel workbook and check if the problem of ‘Excel cannot open read-only documents’ is resolved.

• Check if OneDrive Storage is Full

If Excel files are saved on OneDrive with low or no storage space, you may encounter such issues with your files.

To know the amount of free space on OneDrive, follow these steps:

• On your PC, open Settings and navigate to OneDrive.
  • Click ‘Sync Settings > File Storage‘ to see available space.

You may also visit onedrive.live.com, sign in to the account, and then check the available space. If there’s no space available or the drive is full, empty the storage space and see if the problem is resolved.

• Check and Update MS Office and Windows

Microsoft releases updates to fix known errors. Thus, it is critical to update both Windows and MS Office to the latest release and avoid issues, such as ‘Excel cannot access ‘xxx.xls.’ The Document may be read-only or encrypted.’

• Repair MS Office (MS Excel)

The error ‘Excel cannot open read-only documents’ may appear due to a problem with your MS Office (MS Excel) program. You can repair the MS Office program to resolve such errors. The steps are as follows:

• Open Control Panel and click Uninstall a Program link under Programs.
• Choose Microsoft Office from the list and click the Change button.

• Select Quick Repair and then click Repair to fix problems with MS Office and MS Excel. It will also restore any missing or damaged program files.

After the Repair, open the Excel workbook and check if the error is resolved.

• Check Permissions

The error message may also appear if you access an Excel workbook from a network or shared drive due to lack of write permission. Make sure you have read and write permissions assigned for the particular network drive. Alternatively, you can copy the file from the network drive and save it in your local folder to access and edit it without encountering this error message.

• Repair MS Excel File

If none of the solutions worked, the Excel workbook could be damaged or corrupt. To repair such damaged Excel workbook or spreadsheet, you can use the inbuilt ‘Open and Repair…’ option in MS Excel or install an Excel repair software , such as Stellar Repair for Excel. The software comes in handy when the Open and Repair option fails to fix the Excel workbook problems. It repairs the corrupt or damaged Excel workbook, extracts all components and content from the file with 100% integrity, and saves them in a new Excel workbook.

Conclusion

Sometimes, the ‘Excel cannot open read-only documents’ error can be resolved by a simple restart. But if it doesn’t work, you can follow the solutions discussed in this article to resolve the ‘Excel cannot open read-only documents’ issue.  However, if the issue is caused due to a damaged or corrupt Excel workbook, these methods may not work. In such a case, you can use Excel’s inbuilt repair utility, i.e., Open and Repair, or install Stellar Repair for Excel software recommended by MVPs and industry experts to fix all kinds of problems with MS Excel workbooks.

File Format and Extension of [filename] don’t Match in Excel File

Summary: The “File format and extension of [filename] don’t match. The file could be corrupted or unsafe” error message indicates that the Excel file you’re trying to open is unsupported, unsafe, or corrupted. Read this article to learn more about this error and how to fix this error. It also mentions an advanced Excel recovery tool to repair the corrupted Excel file and retrieve all its data in a few clicks.

You can encounter the “File format and extension of [filename] don’t match. The file could be corrupted or unsafe” error when the Excel application detects any issue with the file. This happens when you try to open an old version file format in a newer version or if the file is received from an unsafe destination. This can prevent you from opening the Excel file.

As indicated from the error message, this error occurs due to the following reasons:

• The file has incorrect file extension.
• The file is corrupted.
• The file you are trying to open is protected.

Now, let’s see how to resolve this Excel error.

Methods to Fix the “File format and extension of [filename] don’t match” Error

Try the following methods to troubleshoot the “File format and extension don’t match” error in Excel.

Method 1: Rename the Excel File

You can face the “File format and extension don’t match” issue if the file has incorrect extension. It can occur if the file extension has been altered or you’ve mistakenly saved the file with incorrect extension. To fix this, you can try renaming the Excel file with the correct file extension.  

Method 2: Check the Default Excel File Format

Different versions of Microsoft Excel use different default file formats. For example, .xls is the default file format of older versions (2003 and lower) of Excel, whereas .xlsx format is used by the newer versions (2007 and later). Opening the Excel file with an incompatible extension can cause the “File format and extension don’t match” issue. You can check the Excel version you are using and ensure it’s compatible with the Excel file you are trying to open.

Method 3: Change the Protected View Settings

You may receive the “File format and extension of excel don’t match” error if the Excel file is protected. You can check and try disabling the Protected View settings .  

Caution: Changing the Protected View settings can put your system at risk. If the Excel file is being downloaded from the internet, it may contain viruses that can infect your system. So be careful before disabling the Protected View settings.

Steps to Change Protected View Settings in Excel:

• In the Excel’s File menu, click on Options.
• Select Trust Center > Trust Center Settings.

• Under Trust Center, select Protected View and disable the below three options:
• Enable Protected View for files originating from the internet.
• Enable Protected View for files located in potentially unsafe locations.
• Enable Protected View for Outlook attachments.

• Click OK. Then, try to open the Excel file.

Method 4: Check and Provide the Excel File Permissions

Sometimes, you can get the error if you don’t have sufficient permissions to open the Excel file. This usually happens when you try to open the Excel file received from other sources. You can check and provide the desired permissions to fix the error. Here are the steps:

• Locate the affected Excel file, right-click on it, and select Properties.

• In the Properties window, click the Securities option and select Edit.

• In the Security window, under ‘Group or users name’, select the user names. Check the file permissions and make sure Full Control is enabled. If not, then click on the Add option.

• Click on the Advanced option in the Users, Computers, Service Accounts, or Groups window**.**

• Click the Find Now option. A list of all users and groups appears in the search field.

• Select “Everyone” from the list and then click OK.

• In the object names field, you will see ‘Everyone’. Click on OK.

• In the Permissions window, select “Everyone” and enable all options (Full Control, Modify, Read & Execute, Read, and Write) under Permissions for Everyone.

• Click Apply and then OK.

Method 4: Repair your Excel File

As the error message indicates, corruption is one of the causes of the “File format and extension of [filename] don’t match” error. If your file is corrupted, you can repair it using Microsoft’s built-in Open and Repair tool. Here are the steps to run the Open and Repair tool to repair corrupted Excel file:

• In Excel, click on File.
• Click Open and then click on Browse to select the corrupted Excel file.
• In the Open dialog box, click the Excel workbook (in which you are facing the error).
• Click the arrow next to the Open button and select Open and Repair.
• Then, click Repair to recover as much data as possible.
• The Excel prompts a message after the repair process is complete. Click Close.

The Open and Repair utility may fail to give the intended results. In such a case, you can repair the corrupted/damaged Excel file using a specialized Excel repair tool . Stellar Repair for Excel is one such tool that can repair severely corrupted Excel files. With the help of this tool, you can quickly recover all the objects from the Excel file. The tool has a simple user interface that even a non-technical can use to repair the Excel files. The tool can also repair multiple Excel files at once. You can check the tool’s functionality by downloading its demo version.

Closure

You can encounter the “File format and extension of [filename] don’t match” error due to different reasons. To resolve the issue, you can check the file extension, permissions, protected settings, etc. If you suspect the error has occurred due to corruption in the Excel file, you can try repairing the Excel file using the Open and Repair tool. If nothing works for you, then try Stellar Repair for Excel . It can repair highly damaged Excel files and recover all the data while preserving the file properties and cell formatting. The tool can help you fix all the common corruption-related errors quickly.

‘Open and Repair’ Doesn’t Work in MS Excel

Summary: In this Blog, we will go through Microsoft office most important product i.e Microsoft excel, let’s get into all possible Manual and an alternate method to deal with MS Excel open and Repair doesn’t work issue, read on to know more.

Whether you are a student or an entrepreneur, the features of Microsoft Excel do not delude anyone. Setting goals, creating budgets, analyzing data, calculating salaries, is there anything that Excel can’t do? All of us have used it and trusted it to calculate and provide a solution to our most difficult problems. However, like every other software application, this otherwise reliable application can sometimes fall prey to unexpected errors which can even threaten to make our critical data inaccessible.

A good idea to avoid loss of data when a Microsoft Excel file becomes corrupt is to take some proactive measures, such as saving a backup copy of your files and creating an automatic recovery file at periodic intervals. If you are faced with a corrupted Excel file, you know you can still use the ‘Open and Repair’ function provided by Microsoft to fix and open corrupt Excel file. However, what should a user do when ‘Open and Repair’ is not working? This is a query shared by millions of Excel users worldwide. Sometimes, the ‘Open and Repair’ functionality of Excel stops working due to unknown reasons. In such cases, if users face Excel file corruption, they get stuck with no idea how to fix the Excel file.

Manual method “Reference”

In this guide, we’re providing you with the solutions to this very problem. If Excel ‘Open and Repair’ is not working, read on to find out the procedures that you can perform to open corrupted files.

‘Open and Repair’ doesn’t work: Try an alternative solution i.e. Stellar Repair for Excel to recover everything from corrupt Excel files.

How to Fix Excel file that Won’t Open

If your workbook is opening in Excel, there are two options to recover its data. It would be best if you try to perform one, and if you are unsuccessful, move on to the next.

Revert the workbook to the version that was saved before the corruption

• Launch Excel and click File -> Open

• Select the file that is corrupted and open it
• Click ‘Yes’ to save the copy of the workbook that was saved before corruption

Important Note: If you use this method, you will lose all changes made to the file after it was corrupted.

Save the workbook in the SYLK file format

• Launch Excel and click File -> Save As.
• In the Save as Type field, select SYLK (Symbolic Link) from the drop-down menu, and click Save.

• To save only the active sheet in the workbook, click OK. The system will display a message that the sheet has features that are not compatible with the SYLK file format.
• Click Yes.
• In Excel click File -> Open.
• Select the file that you saved in SYLK file format and open it.
• In Excel click File -> Save As.
• In the Save as Type field, select Excel Workbook from the drop-down menu.
• In the File Name field, type a new name for your workbook and click Save.

The SYLK file format will filter out the corrupted elements from your workbook, thereby restoring your data.

Important Note: Using this method you only be able to salvage the active sheet in the workbook.

How to Open/Fix an Excel file that cannot be opened

In this case too, there are two options to recover the data. Try to perform one, and if you are unsuccessful, move on to the next.

Set the calculation option to Manual

• Launch Excel and click File -> New.

• From the Available Templates window, select Blank workbook.

• Click File -> Options.
• Under Formulas, in the Calculation options section, click Manual.

• Click OK.
• In Excel click File -> Open.
• Select the corrupted file and open it.

The system opens the corrupted file. Since the workbook won’t be calculated, it might open.

Link the workbook to external references

• Launch Excel and click File -> Open.
• Copy the name of the corrupted file and click Cancel.
• In Excel click File -> New.
• From the Available Templates window, select Blank workbook.
• In the new workbook, on cell A1, type the following:

=File Name!A1

In the above command, the filename is the name of the corrupted file.

• On the Update Values dialog box, select the corrupted file and click OK.
• On the Select Sheet dialog box, select the sheet and click OK.
• Select cell A1. Select the same range of rows and columns as occupied by the data in the corrupted sheet, including cell A1.
• Under the Home tab, in the Clipboard section, click Paste.
• While the range of rows and columns are still selected, click Copy.
• Click the Paste
• Under Paste Values, click Values.

Note: This method lets you recover only the data but not the values and formulas from the workbook.

Alternative Solution

In addition to the above-mentioned techniques, you can also use macros to extract data from a corrupted workbook. However, macros are generally risky, and executing them needs prior technical knowledge.

Thus, if the above methods do not yield the desired results, a quick and easy way for reconstructing Excel files is to use Excel Recovery Software . Stellar Repair for MS SQL software is the best choice for rebuilding damaged Excel files and restoring everything to a new Excel file. The product lets you recover table, chart, chart-sheet, cell comment, image, formula, sort and filter data from damaged workbooks and also allows you to fix multiple files at one go.

Wrapping it up

Though one of the above-mentioned techniques should recover Excel file if ‘_Open and Repair’ utility doesn’t work_, in case you’ve reached nowhere even after using them, contact Microsoft support for more help.

How to Repair Excel Document on a Flash Drive

Summary: Microsoft Excel files are stored on flash drives if they need to be transferred between systems or if they need to be backed up. But sometimes unforeseen issues can corrupt the Excel sheets stored on flash drives. When that happens, it can be an arduous task to repair Excel documents on a flash drive. Through this post let us try to understand the reasons why Excel sheets stored on flash drives can get corrupted and how users can resolve them easily.

In this digital age, we all work with computers, files, and documents. Flash drives or USBs are common ways of storing data in an external place. Be it for a meeting or for a party playlist, these devices come handy when one wants to transfer data or access the files stored elsewhere.

You may need to access your data from another location. That’s when a USB flash drive might come in handy. And, that’s exactly why Excel sheets too end up on flash drives; either that or for backup purposes. However, there are many instances where an Excel file stored in a USB gets corrupted when one tries to access the file. The error message you get while trying to open the Excel file would be a great clue for figuring out the exact reason behind corruption.

This blog will provide insights into what are the reasons for the corruption of a USB and how the users can repair Excel on flash drive that has been corrupted.

Reasons for USB inaccessibility

Sometimes flash drives or USBs can become unresponsive due to numerous reasons. There are two types of corruption – logical and physical. Physical corruptions occur due to broken stems and connectors, broken circuits, NAND gate, not recognised, RAW, need to format, not accessible, and dead drives (no power supply).

One of the main reasons behind such an error could be that the USB drive has been infected by some virus. This can affect any file – not only the ones which are there in the USB drive but also the ones which are there in the PC/Laptop where you connect the USB drive. It is recommended that you scan the USB drive with reliable antivirus software to detect viruses.

There can be various other reasons that may make your USB corrupt or unresponsive. But there are very slim chances that you will be able to recover a flash drive that has physical damage. However, you can try to run the check disk on the USB drive to fix the drive. We will be discussing this as you read on.

Recovery Methods for Corrupted Flash Drives

There are 3 tried and tested recovery methods. Try them and see which one works out for you.

1. Restoring Excel Files from Windows backup

To bring back your old Excel files, fixing up the corrupt file is your best option. Importantly note that this method would work only if your system’s Windows backup option has been enabled.

Step-by-step process for restoring your older Excel files:

• Connect your USB drive
• Go to “My Computer”->USB Drive->Check if the file exists
• Right click on the excel file and click on the restore previous versions

• You will now see a list of older versions which were created
• Select one the backups and click on “restore”

2. Using Command Line to Recover Excel Files

In case you are looking to repair Excel on flash drive, you can also resolve it by using the command line. Just follow the below steps to see if you can recover the excel files.

• Connect your USB Flash drive
• Open “Run” (press Windows+R) and then open “cmd”

• Type “attrib -h -r -s /s /d (USB Drive Letter):\*.*” where the (USB Drive Letter) is the drive letter you can find using “My Computer”
• Once this has been completed, Windows will start repairing your files
• After the process gets over, try accessing the excel file to see if the data has been recovered

3. Running a “Check Disk” on flash drives

Follow the below steps while the USB flash drive has been plugged into your computer:

• Open “Run” and then open “cmd”
• Type in “chkdsk /X /f (USB Drive Letter)” where the “(USB Drive Letter)” is the letter of the corrupted USB Drive. You can get this letter easily from the “My Computer”.

It will now check your disk to and correct any corrupted records.

What if none of these methods works?

In case none of the above methods works to repair Excel document on a flash drive, then you would need a professional Excel repair software such as Stellar Repair for Excel to restore your files. Such software not only help repair corrupted Excel files on flash drives but also help in recovering the data stored within them in their original format.

Stellar Repair for Excel resolves corruption problems in Excel files and recovers all formulas, charts, cell formatting, and more from them. It can repair multiple Excel files in one go. Equipped with a fully interactive GUI, working with this product is extremely easy.

To sum it up

Although flash drives are quite popularly used, they are not the most reliable of storage devices. These drives can fail anytime without warning. Thus, always back up your data on other more robust devices instead of flash drives. We hope that with the above tried and tested methods you will easily be able to repair Excel document on flash drive if need be. For any queries that you have, feel free to leave a comment below!

How Can I Recover Corrupted Excel File 2016?

Error Messages Indicating Corruption in Excel File

• When an Excel 2016 file turns corrupt, you’ll receive an error message that reads: “The file is corrupt and cannot be opened .”

• But sometimes, you encounter the “Excel cannot open this file” error message due to corruption in the file.

Why does Excel File turn Corrupt?

Following are some common reasons that can turn an Excel file corrupt:

• Large size of the Excel file
• The file is virus infected
• Hard drive on which Excel file is stored has developed bad sectors
• Abrupt system shutdown while working on a worksheet

Workarounds to Recover Data from Corrupt Excel

The workarounds to recover corrupted Excel file 2016 data will vary depending on whether you can open the file or not.

How to Recover Corrupted Excel File 2016 Data When You Can Open the File?

If the corrupt Excel file is open, try any of the following workarounds to retrieve the data:

Workaround 1 – Use the Recover Unsaved Workbooks Option

If your Excel file gets corrupt while you are working on it and you haven’t saved the changes, you can try retrieving the file’s data by following these steps:

• Open your Excel 2016 application and click on the Open Other Workbooks option.

• Click the Recover Unsaved Workbooks button at the bottom of the ‘Recent Workbooks’ section.

• A window with list of unsaved Excel files will open. Click the corrupt file you want to open.

This will reopen your last saved version of the Excel workbook. If this method doesn’t work, proceed with the next workaround.

Workaround 2 – Revert to Last Saved Version of your Excel File

If your Excel file gets corrupt in the middle of making any changes, you can recover the file’s data if the changes haven’t been saved. For this, you need to revert to the last saved version of your Excel file. Doing so will discard any changes that may have caused the file to turn corrupt. Here’s how to do it:

• In your Excel 2016 file, click File from the main menu.
• Click Open. From the list of workbooks under Recent workbooks, double-click the corrupt workbook that is already open in Excel.
• Click Yes when prompted to reopen the workbook.

Excel will revert the corrupt file to its last saved version. If it fails, skip to the next workaround.

Workaround 3 – Save the Corrupted Excel File in Symbolic Link (SYLK) Format

Saving an Excel file in SYLK format might help you filter out corrupted elements from the file. Here are the steps to do so:

• From your Excel File menu, choose Save As.
• In ‘Save As’ window that pops-up, from the Save as type dropdown list, choose the SYLK (Symbolic Link) option, and then click Save.

Note: Only the active sheet will be saved in workbook on choosing the SYLK format.

• Click OK when prompted that “The selected file type does not support workbooks that contain multiple sheets”. This will only save the active sheet.

• Click Yes when the warning message appears - “Some features in your workbook might be lost if you save it as SYLK (Symbolic Link)”.

• Click File > Open.
• Browse the corrupt workbook saved with SYLK format (.slk) and open it.
• After opening the file, select File > Save As.
• In ‘Save as type’ dialog box, select Excel workbook.
• Rename the workbook and hit the Save button.

After performing these steps, a copy of your original workbook will be saved at the specified location.

How to Recover Corrupted Excel File 2016 Data When You Cannot Open the File?

If you can’t access the Excel file, apply one of these workarounds to salvage the file’s data.

Workaround 1 – Open and Repair the Excel File

Excel automatically initiates ‘File Recovery’ mode on opening a corrupt file. After starting the auto-recovery mode, it attempts to reopen and repair the corrupt Excel file at the same time. If the auto-recovery mode does not start automatically, you can try to fix corrupted Excel file 2016 manually by using ‘Open and Repair’. Follow these steps:

• Open a blank file, click the File tab and select Open.
• Browse the location where the corrupt 2016 Excel file is stored.
• When an ‘Open’ dialog box appears, select the file you want to repair.
• Once the file is selected, click the arrow next to the Open button, and then click the Open and Repair button.
• Do any of these actions:
• Click Repair to fix corrupted file and recover data from it.
• Click Extract Data if you cannot repair the file or only need to extract values and formulas.

If performing these actions doesn’t help you retrieve the data, proceed with the next workaround.

Workaround 2 – Disable the Protected View Settings

Follow these steps to disable the protected view settings in an Excel file:

• Open a blank 2016 workbook.

• Click the File tab and then select Options.

• When an Excel Options window opens, click Trust Center > Trust Center Settings.

• In the window that pops-up, choose Protected View from the left side navigation. Under ‘Protected View’, uncheck all the checkboxes, and then hit OK.

Now, try opening your corrupt Excel 2016 file. If it won’t open, try the next workaround.

Workaround 3 – Link to the Corrupt Excel File using External References

If you only need to extract Excel file data without formulas or calculated values, use external references to link to your corrupt Excel 2016 file. Here’s how you can do it:

• From your Excel file, click File > Open.
• From the window that opens, click Computer and then click Browse and copy the name of your corrupt Excel 2016 file. Click the Cancel button.

• Go back to your Excel file, click File > New > Blank workbook.

• In the new Excel workbook, type “=CorruptExcelFile Name!A1” in cell A1 to reference cell A1 of the corrupted file. Replace the ‘CorruptExcelFile Name’ with the name of the corrupt file that you have copied above. Hit ENTER.
• If ‘Update Values’ dialog box appears, select the corrupt 2016 Excel file, and then click OK.
• If ‘Select Sheet’ dialog box pops-up, select a corrupt sheet, and press the OK button.
• Select and drag cell A1 till the columns required to store the data of your corrupted Excel file.
• Next, copy row A and drag it down to the rows needed to save the file’s data.
• Select and copy the file’s data.
• From the Edit menu, choose the Paste Special option and then select Values. Click OK to paste values and remove the reference links to the corrupt file.

Check the new Excel file for recoverable data. If this didn’t work, consider using an Excel file repair tool to retrieve data.

Alternative Solution to Recover Excel File Data

Applying the above workarounds may take considerable time to recover corrupted Excel file 2016. Also, they may fail to extract data from a severely corrupted file. Using Stellar Repair for Excel software can help you overcome these limitations. The software helps repair severely corrupted XLS/XLSX file and retrieve all the file data in a few simple steps.

Key benefits of using Stellar Repair for Excel are as follows:

• Recovers tables, pivot tables, images, charts, chartsheets, hidden sheets, etc.
• Maintains original spreadsheet properties and cell formatting
• Batch repair multiple Excel XLS/XLSX files in a single go
• Supports MS Excel 2019, 2016, 2013, and previous versions

Check out this video to know how the Excel file repair tool from Stellar® works:

Conclusion

Errors such as ‘the file is corrupt and cannot be opened’, ‘Excel cannot open this file’, etc. indicate corruption in an Excel file. Large-sized workbook, virus infection, bad sectors on hard disk drive, etc. are some reasons that may result in Excel file corruption. The workarounds discussed in this article can help you recover corrupted Excel file 2016 data. However, manual methods can be time-consuming and might fail to extract data from severely corrupted workbook. A better alternative is to use Stellar Repair for Excel software that is purpose-built to repair and recover data from damaged or corrupted Excel file.

Also read: