How to fix Pivot Table Field Name is not Valid error in Excel?

The Pivot Table field name is not valid error can occur while creating, modifying, or refreshing data fields in the pivot table. It can also appear when using VBA code to modify the pivot table. It usually occurs when there is an issue with the field name in a code or if there is a hidden or empty column in the pivot table. However, there could be many other reasons behind this error.

Why the “Pivot Table Field Name is not Valid” Error Occurs?

You can get the “Pivot Table field name not valid” error in Excel due to several reasons. Some possible causes are:

• Excel file is corrupted
• Damaged fields in the pivot table
• Pivot table is corrupted/damaged
• Hidden columns in the pivot table
• Macro (referring to the pivot table) is corrupted
• Preserve formatting option is enabled
• Missing or incorrect fields in the VBA code
• Issue with workbook.RefreshAll method syntax (if using)
• Pivot Table contains empty columns
• Header values or header column is missing in the Pivot Table
• Pivot table is created without headers
• Columns/rows are deleted from the Pivot Table

Methods to Fix Pivot Table Field Name is not Valid Error in Excel

You can get this error if you have selected the complete data sheet and then trying to create the Pivot Table. Make sure you choose only the data fields that you want to insert in the Pivot Table. If this is not the case, then follow the troubleshooting methods mentioned below.

Method 1: Check the Header Value in the Pivot Table

The “Pivot table field name is not valid” error can occur if you have not set up the pivot table correctly. All the columns having data in them should have header and header values. A pivot table without a header value can create issues. You can check the header and its value from the Formula bar. Change the header if the header value is too lengthy or if it contains special characters.

Method 2: Check and Change the Data Range in the Pivot Table

The “Pivot Table field name is not valid” can occur while modifying a field in Pivot Table. It usually occurs if you’re trying to add or modify the field by selecting an incorrect data range in the Create PivotTable dialog box. The “Create PivotTable“ feature helps define how data would be displayed within the pivot table.

Let’s take a scenario to understand this. Open the Excel file with PivotTable. Click on the fields (you want to add), go to the Insert option, and click PivotTable.

If you select an incorrect range, i.e. A1:E18, instead of correct range - “Expenses**!$A$3:Expenses!$A$4**,” you will immediately get the error message.

So, type the correct range under the Select a table or range option and click OK.

Method 3: Unhide Excel Columns/Rows

The error can also occur if some columns/rows of the Pivot Table’s data source are hidden. When you try to add a hidden column as a field in the PivotTable, the Excel application will fail to read the data of the hidden column. You can check and unhide the Excel columns by following these steps:

• Open the Excel file.

• Locate the hidden column number.

• Move your cursor on the hidden column number and right-click on the space between the columns. Click Unhide.

  

Method 4: Check and Delete Empty Excel Columns

Sometimes, you can get the “Pivot Table field name is not valid” error if you are trying to use an empty column as a field in your Pivot Table. Check the columns with no values in all cells. If found, then delete the empty columns. This method is ideal for small-size Excel files. However, for large-sized files, it is a time-consuming process.

Method 5: Unmerge the Column Header (If Merged)

The “Pivot Table field name is not valid” error can also occur due to merged column headers. The pivot table references headers to identify the data inside the rows or columns. The merged headers can sometimes create data inconsistencies. You can try unmerging the column headers to fix the issue. Follow these steps:

• In the Excel file, go to the Home

• Click the Merge & Center option and select Unmerge Cells from the dropdown.

  

Method 6: Disable the Background Refresh Option

If the “background refresh” option in the Excel file is enabled, it may also create issues with Pivot Table. The Excel updates all the pivot tables in the background even after a small change if the background refresh option is enabled. This may create issues if the Excel file is large with too many tables. You can try turning off the “background refresh” option in the Excel file to troubleshoot the issue. Here is how to do so:

• In the Excel file, go to the Data tab and then click Connections.

  

• In the Workbook Connectionsdialog box, click on the ‘Add’ dropdown to add the workbook (in which you need to modify the refresh settings).

  

• Once you have chosen the Excel file, click Properties.

  

• In the Connection Properties window, unselect the **”Enable background refresh”**option, select the “Refresh data when opening the file“, and click **OK.

  

  **

Method 7: Check the VBA Code

The error can also occur when working with PivotTable using VBA code in Excel. Some Excel users reported this error on forums as run-time error 1004: The PivotTable field name is not valid. This error usually occurs when there are issues in the VBA code, affecting the PivotTable data source or field references. You can check field names referring to PivotTable or Workbook.RefreshAll function syntax and other errors in the code.

Method 8: Repair your Excel File

One of the reasons behind the “Pivot Table field name is not valid” error is corruption in the Excel file, containing the Pivot Table. You can repair your Excel file using Microsoft built-in utility - Open and Repair. Here’s how to use this utility:

• In Excel, navigate to File > Open.

• Click Browse to choose the affected workbook.

• The Open dialog box will appear. Click on the corrupted file.

• Click the arrow next to the Openbutton and then select Open and Repair.

• You will see a dialog box with three buttons - Repair, Extract Data, and Cancel.

  

• Click on the Repair button to recover as much of the data as possible.

• After repair, a message is displayed. Click Close.

Method 9: Use a Professional Excel Repair Tool

If the Excel file is heavily damaged or corrupted, then the “Open and Repair” utility may not work or provide the intended results. In such a case, you can opt for a professional Excel repair tool. Stellar Repair for Excel is an advanced Excel file repair tool, which is highly recommended by experts. It can repair severely corrupted Excel files and restore all the data from corrupt file, including pivot tables. This tool comes with a user-friendly interface that even a non-technical user can use. You can try the software’s demo version to check how it works. The software is fully compatible with all Excel versions, including Excel 2019.

Conclusion

The Excel error “Pivot Table field name is not valid” can occur due to hidden or merged column/row headers, empty columns/rows, corrupted pivot table, and various other reasons. You can try the methods mentioned above to fix the error. If this error has occurred due to corruption in the Excel file, then you can use Stellar Repair for Excel - an advanced tool to repair corrupted pivot table, macros, fields, or other elements in an Excel file. It is compatible with all Windows editions, including the latest Windows 11. It can help fix the error if the data source or Pivot table configuration is affected by corruption.

How to Fix a Corrupted .xls File? The Everything Guide

Undoubtedly, Excel is so powerful that it can help you to process, analysis, and store data, in masses.

That’s the reason it has been there for years and helping this world in data.

But…

With all those powers comes some nasty problems which no Excel users like to face. Can you guess what I’m talking about?

Think about a Corrupted Excel File. Nightmare? Isn’t it?

And do you remember that last time when you have opened a workbook and you got a message that this workbook is might corrupt?

The TRUTH is, this is something which you cannot avoid, but, you can prepare yourself in the best way and deal with it like a PRO.

So today, in this post, I’d like to share with you to everything you need to know about a corrupt Excel file (.xls), why it happens, how to fix it like a PRO, and much more.

…let’s get started.

Note: In this post, we’ll be covering the .xls version (which is the extension for the file which is created in Excel 2007 or the earlier versions) and if you want to know about the new version, here’s the quick fix for that.

Why My Excel File Got Corrupted?

There can be one or multiple reasons for an Excel file to get corrupted. Below I have detailed about some of the major of them.

1. Large Excel File

You can store data in a workbook the way you want but sometimes using excessive thing can make an Excel file bigger in size.

And that kind of data files can crash at any point in time. Here are a few things which make the Excel files heavy, like

• Conditional Formatting.
• Colors formatting.
• Using merged cells in place of text alignment.
• Volatile functions: Formulae that iterate every time you open or change a cell value; OFFSET, NOW.
• Using a complete column or row as a reference than the data set range.
• Using complex formulas; VLOOKUP in place of Index/Match, Nested If in place of MAXIFS, MINIFS.
• Calculations or reference across workbooks.

Related: How to Fix Formatting Issues in Excel

2. Abrupt System Shutdown

Shutting down the system without following the procedure can corrupt your data file.

This shut down can be due to a power failure or any other unexpected technical challenges.

So it is always important to follow the procedures and shut down your system properly to avoid data losses.

3. Infected Excel File (Virus Attack)

This is the most common and obvious reason for Excel file corruption.

Although we always keep our system safe using various Antiviruses, still there is always a probability of virus attacks and loss of important files.

It is always advised to use a safe and strong antivirus compatible with your system requirements.

What are the Signs to Know When an Excel File is Corrupted?

In this section, we will discuss what are the signs which you can get when an Excel file is corrupted, let’s dig into it.

1. The File is Corrupt and Cannot Be Opened

This is one of the most common messages you can see when your workbook is corrupted.

But there is also a chance that it is just because of the version compatibility where you have a .xls file but you are using the latest version of Excel check out this detailed post by Priyanka

2. We Found a Problem with some Content in this File…

There’s another error message which you can get while opening a file:

We Found a Problem with some content in Do you want us to recover as much as we can? If you trust the source of this workbook, click yes.

There are a lot of applications out there (I think almost every) which exports the data as a .xls format. Those files have a greater chance of having this kind of error.

3. “Filename.xls” cannot be accessed

There can also be a situation where you get the error:

“Filename.xls” cannot be accessed. The file may be corrupted, located on a server that is not responding.

Well, this message is a bit misleading.

You won’t be able to decide that your file is actually corrupted or just not on the location.

My Excel File Got Corrupted, now What Should I Do?

There are many ways to recover the data from the corrupt excel files. But before you start, it is always advised to create a copy of the corrupted file.

You can save a lot of time with Stellar Repair for Excel, which make data recovery just with few clicks.

But before you go for a data recovery software, let’s try out some manual steps which can help.

When a workbook get corrupted the first thing comes to the mind is to recover data from it…

…and you what there’s a simple option there in the Excel which you can use to do this. Below are the steps you need to follow:

• First of all, open the Excel and click on the office icon.

• After that, go to the “Open” and select the file which is corrupted.

• Now, click on the open drop-down and select “Open and Repair”.

• At this point, you have two options:

1. Repair File
2. Extract Data

Let’s get into both of these options one by one…

1. Repair File

This option helps you to repair the file and the moment you click on it it takes a few seconds afterward and shows you the result with a message box and also provide you a log file.

And once it is done with repairing, you’ll get your file opened and you can save that file as a new copy.

Yes, that’s it.

2. Extract Data

If somehow you aren’t able to get your file repaired, you can also extract data from that file using “Extract Data” option.

Even in this option, you can get data in two ways.

1. As Values
2. With Formulas

In the first option, Excel simply extracts data as value ignoring all the formulas driving those value (which is the best way if you just need to have that data back ).

But in the second option, Excel tries to recover the formulas as much as possible.

Check out this smart technique by Jyoti which you can use it you aren’t able to recover data from the file.

Preventions to Not to have any Excel File Go Corrupt in Future

Future is fragile, what I’m trying to say is the more you work in Excel and process data there could be a chance that your workbook goes corrupt.

If there’s no security then what an EXCEL POWER user should do?

Well, there are few things which you can do or take care of while working with Excel so that you won’t have to worry about corruption of Excel workbooks.

Let’s see what you can do…

1. Change Recalculation Option

Now here’s the thing when you work with a hell lot of data, there a common thing that you gotta using formulas. Right?

But, the thing these formulas are something which makes your Excel file slows down sometimes make them go corrupt.

There’s one small tweak you can do in your workbook is change the calculation method.

Now with the manual calculation, you just need to whenever you open your file it won’t recalculate all the formulas.

And when you update your data you can simply click on the “Calculate Now” and it will calculate all the formulas again.

Quick Tip: Beware of Volatile Functions and use them with caution as recalculates them every time you change something in the worksheet.

2. Use VBA Codes Instead of Formulas

Now, this is what I do when I need to use complex formulas in a workbook.

Here’s how you can do this: Let’s say you have a formula in the cell A1, like below, which calculates the age.

=“You age is “& DATEDIF(Date-of-Birth,TODAY(),”y”) &” Year(s), “& DATEDIF(Date-of-Birth,TODAY(),”ym”)& “ Month(s) & “& DATEDIF(Date-of-Birth,TODAY(),”md”)& “ Day(s).”

Now, instead of simply entering it into the cell A1 which I would write a macro code which inserts this formula into the cell A1 and then convert it into the a value.

Here’s the code:

Sub CalculateAge()
Range(“B1”).Value = _
“=””Your age is “”” & _
“&DATEDIF(A1,TODAY(),””y””)” & _
“&”” Year(s), “”” & _
“&DATEDIF(A1,TODAY(),””ym””)” & _
“&”” Month(s), and “”” & _
“&DATEDIF(A1,TODAY(),””md””)” & _
“&”” Days(s).”””
Range(“B1”) = Range(“B1”).Value
End Sub

Note: To write these code you need to have basic understading of VBA (make sure check out this guide for this).

3. Use a File Recovery Application

Recently we asked a quick question to our readers on ExcelChamps that if they have ever faced a situation where they got a corruption message in Excel.

You’ll be astonied to hear that 50% percent of the people said “YES” they faced this thing in the past.

Now, this is alarming, if you are heading a team or you have a bunch of people in your company who use Excel…

…there’s a high probability that half of them gonna face this issue. So the best way to deal with this to have an App FIX your Excel file for you.

With STELLAR REPAIR FOR EXCEL, you just need a few clicks, yes that’s right. Let me show you with the below steps:

• First of all, download the app and install it (it’s simple).

• After that, open the app and click on the “Browse” and simply select the file which is corrupted.

• In the end, click on the REPAIR to let the Excel repair software fix your file (it takes a few seconds).

Once you complete repairing your file, you’ll get a message in your on the status bar and after that, you can open your file.

Final Thoughts

If you are a POWER Excel user then there’s a must for you to have known how to deal with a situation where you got a corrupt Excel file.

But I must recommend you to TRY OUT Stellar Repair for Excel so that’s you don’t have to worry about your Excel files anymore.

I’m sure you found this post helpful, and please don’t forget to share this tip with your colleagues, I’m sure they’ll appreciate it.

How to Fix Excel Run Time Error 1004

Summary: Run-time errors are windows-specific issues that occur while the program is running. This blog will teach you how to fix Excel run-time error 1004. In addition, you’ll learn about an Excel repair tool that can help fix the error 1004 if it occurs due to corruption in Excel files.

VBA (Microsoft Visual Basic for Application) is an internal programming language in Microsoft Excel. Sometimes, when users try to run VBA or generate a Macro in Excel, the Run-time error 1004 may occur. This error may occur due to the presence of more legend entries in the chart, file conflict, incorrect Macro name, and corrupt Excel files. In this blog, we have discussed the reasons and shared some solutions to resolve run-time error 1004.

Why This Error Occurs?

The run time error 1004 usually occurs when you run a VBA macro with the Legend Entries method to modify the legend entries in the MS Excel chart. It happens when the chart contains more legend entries than the available space, macro name conflicts, corrupt Excel files, or data-types mismatch in the VBA code.

Ways to Fix Excel Run-Time Error 1004?

Try the below workarounds to fix Excel run-time error 1004:

Create a Macro to Reduce Chart Legend Font Size

Sometimes, Excel throws the run-time error when you try to run VBA macro to change the legend entries in a Microsoft Excel chart. This error usually occurs when Microsoft Excel truncates the legend entries because of the more legend entries and less space availability. To fix this, try to create a macro that shrinks/minimize the font size of the Excel chart legend text before the VBA macro, and then restore the font size of the chart legend. Here is the macro code:

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19

VBCopy
Sub ResizeLegendEntries()

With Worksheets("Sheet1").ChartObjects(1).Activate
      ' Store the current font size
      fntSZ = ActiveChart.Legend.Font.Size

'Temporarily change the font size.
      ActiveChart.Legend.Font.Size = 2

'Place your LegendEntries macro code here to make
         'the changes that you want to the chart legend.

' Restore the font size.
      ActiveChart.Legend.Font.Size = fntSZ
   End With

End Sub
Note: Make sure you have an Excel chart to run the code on the worksheet.

Uninstall Microsoft Work

You may encounter a run-time error 1004 in Excel version 2009 or older versions due to conflicts between Microsoft works and Microsoft Excel. This error usually occurs if your system has both Microsoft Office and Microsoft Works. Uninstalling one of them will fix the issue. Try the below steps to uninstall Microsoft Work:

• First, open the Task Manager using the shortcut CTRL + ALT + DEL altogether
• The Task Manager window is displayed.

• Click the Process tab, right-click on each program you want to close, and then click End Task.
• Stop all the running programs.
• Open the Run window and type appwiz.cpl to open the Programs and Feature window.

• Search for Microsoft Works and click Uninstall.

Try Deleting GWXL97.Xla File

The Add-ins files with .xla extension in MS-EXCEL is used to provide additional functionality to Excel spreadsheets. Sometimes, deleting the GWXL97.XLA file fixes the run-time error. Here are the steps to delete this file:

• Make sure you have an Admins rights, open the Windows Explorer
• Follow the Path C:\Programs Files\MSOffice\Office\XLSTART.
• Find and right-click on the GWXL97.XLA file
• Click Delete.

Change Trust Center Settings

Sometimes, run-time errors might arise because of incorrect security settings. The Trust Center settings help you find the Privacy and security settings for Microsoft Excel. Follow the below steps to change the Trust center settings:

• Open Microsoft Excel.
• Go to File > Options.
• The Excel options window is displayed.
• Choose Trust Center, and click Trust Center Settings.
• Tap on the Macro Settings tab, and select Trust access to the VBA project object model.

• Click OK.

Run Open and Repair Tool

The Runtime error also arises when MS Excel detects a corrupted worksheet. It automatically begins the File recovery mode and starts repairing it. However, if the Recovery mode fails to start, use the Open and Repair tool with the below steps:

• Click File > Open.
• Click the location and folder with a corrupted workbook.
• In the Open dialog box, choose the corrupted workbook.
• Click the arrow next to the Open tab, and go to the Open and Repair tab.
• Click Repair.

You can also opt for Stellar Repair for Excel if the Microsoft Excel’s built-in tool cannot fix the error.

Use Stellar Repair for Excel

Stellar Repair for Excel is a professional software for repairing damage. xls, .xlsx, .xltm, .xltx, and .xlsm files and recovering all its objects. Here are the steps to fix the error using this tool:

• First, download, install, and run Stellar Repair for Excel.
• Click the Browse tab on the interface window to choose the corrupted Excel file you need to repair.
• Click Scan. You will see the scan progress in the scanning window.
• Click OK.
• The tool can let you preview all the recoverable Excel file components including tables, pivot tables, charts, formulas, etc.
• Click Save to save the repaired file.
• A Save File dialog box will appear with the below two options:
• Default location
• New location
• Choose a suitable option.
• Click the Save option to repair the Excel file that you have chosen.
• Once the repair is complete, it will display a message “File repaired successfully.”
• Click OK.

Conclusion

Now you know the Excel run-time error 1004, its cause, and solutions. Follow the workarounds discussed in the blog to rectify the error quickly. However, Stellar Repair for Excel makes your task of removing run-time errors easy. It’s a powerful software to fix all the issues with Excel files. Also, it helps in extracting data from the damaged file and saves it to a new Excel workbook.

Solutions to open Excel Read Only Documents

‘Excel cannot open read-only documents’ is an error message that usually appears when you try to open an Excel (XLS or XLSX) file downloaded from the Internet, email, or the network server. It may also appear when you try to open an encrypted or password-protected Excel document. In such a case, MS Excel prevents the user from making any changes to the document.

Reasons behind the “Excel cannot access ‘xxx.xls.’ The Document may be read-only or encrypted” Error

There could be several reasons that may cause the error. Some of them are as follows:

• Corrupt or damaged Excel workbook
• Incompatible or unsupported add-in
• Antivirus or malware software conflict
• Read-Only Excel file
• The file is encrypted
• File or drive read/write permissions issues
• Protected Excel workbook
• Damaged or missing MS Office (MS Excel) program files

Solutions to Open and Edit Read-Only Excel Documents

Below are a few solutions that can help you fix the ‘Excel cannot access ‘xxx.xls.’ The Document may be read-only or encrypted’ error and allow you to open and edit Excel documents.

• Remove Read-only Attribute from Excel File Properties

The ‘Excel cannot open read-only documents’ error message may appear when the Excel file property is set to read-only. To check if this is the case, follow these steps:

• Right-click on the particular Excel (xls/xlsx) document and select ‘Properties’.
  • Uncheck the ‘Read-only’ attribute and then click the ‘OK’ button.

Now try to open the Excel document and check if the problem is fixed.

• Adjust Antivirus Settings

A few antivirus programs block Excel files and other Office documents by opening those in ‘read-only’ mode. In such cases, try adjusting the antivirus settings to open the Excel files normally. This will allow you to edit, modify, and save the Excel workbook without encountering the “Excel cannot access ‘xxx.xls.’ The Document may be a read-only or encrypted” error message.

• Disable Protected-View

The error may appear when you try to open an Excel file received as email attachments or downloaded from unsafe source. The file may potentially contain viruses, worms, or other types of malware that could damage the system or the server.

To safeguard the system, MS Excel opens such files in Protected View. It may also open an Excel workbook in Protected Mode when it detects a problem with the file. This security feature allows you to read or view Excel files and reduces the risks to the computer system or PC.

However, you can click File > Info and then click ‘Edit Anyway‘ to access and edit file content. You may also disable the Protected View setting via File > Options > Trust Center > Trust Center Settings…> Protected View. However, we do not recommend this.

• Renew/Activate Microsoft Office

If MS Office is in a deactivated state or its subscription has expired, the Office documents, including the Excel, could be in ‘read-only reduced functionality mode.’

In such a scenario, activate Microsoft Office or renew the Office subscription. Then open the Excel workbook and check if the problem of ‘Excel cannot open read-only documents’ is resolved.

• Check if OneDrive Storage is Full

If Excel files are saved on OneDrive with low or no storage space, you may encounter such issues with your files.

To know the amount of free space on OneDrive, follow these steps:

• On your PC, open Settings and navigate to OneDrive.
  • Click ‘Sync Settings > File Storage‘ to see available space.

You may also visit onedrive.live.com, sign in to the account, and then check the available space. If there’s no space available or the drive is full, empty the storage space and see if the problem is resolved.

• Check and Update MS Office and Windows

Microsoft releases updates to fix known errors. Thus, it is critical to update both Windows and MS Office to the latest release and avoid issues, such as ‘Excel cannot access ‘xxx.xls.’ The Document may be read-only or encrypted.’

• Repair MS Office (MS Excel)

The error ‘Excel cannot open read-only documents’ may appear due to a problem with your MS Office (MS Excel) program. You can repair the MS Office program to resolve such errors. The steps are as follows:

• Open Control Panel and click Uninstall a Program link under Programs.
• Choose Microsoft Office from the list and click the Change button.

• Select Quick Repair and then click Repair to fix problems with MS Office and MS Excel. It will also restore any missing or damaged program files.

After the Repair, open the Excel workbook and check if the error is resolved.

• Check Permissions

The error message may also appear if you access an Excel workbook from a network or shared drive due to lack of write permission. Make sure you have read and write permissions assigned for the particular network drive. Alternatively, you can copy the file from the network drive and save it in your local folder to access and edit it without encountering this error message.

• Repair MS Excel File

If none of the solutions worked, the Excel workbook could be damaged or corrupt. To repair such damaged Excel workbook or spreadsheet, you can use the inbuilt ‘Open and Repair…’ option in MS Excel or install an Excel repair software , such as Stellar Repair for Excel. The software comes in handy when the Open and Repair option fails to fix the Excel workbook problems. It repairs the corrupt or damaged Excel workbook, extracts all components and content from the file with 100% integrity, and saves them in a new Excel workbook.

Conclusion

Sometimes, the ‘Excel cannot open read-only documents’ error can be resolved by a simple restart. But if it doesn’t work, you can follow the solutions discussed in this article to resolve the ‘Excel cannot open read-only documents’ issue.  However, if the issue is caused due to a damaged or corrupt Excel workbook, these methods may not work. In such a case, you can use Excel’s inbuilt repair utility, i.e., Open and Repair, or install Stellar Repair for Excel software recommended by MVPs and industry experts to fix all kinds of problems with MS Excel workbooks.

Quick Fixes to Repair Microsoft Excel 2013/2016 Content related error

Summary: The blog outlines some quick tips to fix ‘We found a problem with some content’ error in Microsoft Excel 2013/2016. It explains manual procedure to resolve the error and also suggests an automated tool to perform the repair process to retrieve all possible data from a corrupt workbook.

Sometimes, when opening an MS Excel file, you may receive an error message that reads:

“**We found a problem with some content in ‘filename.xlsx’. Do you want us to try to recover as much as we can? If you trust the source of this workbook, click Yes.**“

Figure 1 – Excel ‘found a problem with some content’ Error Message

What Causes ‘We Found a Problem with Some Content’ Error?

There is no clear answer as to what results in the Excel error – ‘**We found a problem with some content in <filename.xlsx>**’. However, based on some user experiences, it appears that the error occurs due to corruption in an Excel workbook. It may turn corrupt when:

• You try opening the Excel file saved on a network-shared drive.
• A string is added in a cell in Excel, instead of a numeric value.
• Text values in formulas exceed 255 characters.

How to Resolve ‘We Found a Problem with Some Content’ Error?

Follow these tips to fix the Excel error:

IMPORTANT! Before you follow the tips to resolve the Excel error, keep these points in mind: Make sure you have closed all of the opened Excel workbooks. Try restoring Excel file data from the most recent backup copy. If you don’t have a backup copy, make a copy of the corrupt Excel file and perform repair and recovery procedures on that backup copy.

Tip #1: Repair Corrupt Excel File

File Recovery mode is a native Excel recovery utility that automatically opens whenever any inconsistencies are found in the worksheet. If Microsoft doesn’t detect any issue or fails to open the File Recovery mode, you can start it manually to recover the corrupt Excel file. To do so, follow the steps below:

1. Click on the File menu, and then select Open.
2. In the Open dialog box, navigate to the folder location where the corrupt Excel file is saved.
3. Select the corrupt file, and then click on arrow sign available next to Open button to select Open and Repair option.

Figure 2 – Open and Repair Feature in Excel

1. Next, click Repair to recover maximum possible data.
2. If the repair is not able to recover the data from the workbook, select Extract Data to extract all possible formulas and values from the workbook.

If repairing the corrupt Excel file doesn’t work, you can try an Excel file repair tool to fix corruption errors. You can also try to recover data from the corrupt file manually by following the next tips.

Read this: What to do when Open and Repair doesn’t work?

Tip #2: Set Calculation Option to Manual

To make the file accessible, try setting the calculation option in Excel from automatic to manual. As a result, the workbook will not be recalculated and may open in Excel. For this, perform the following:

1. Click File, and then click New.
2. Under New, click the Blank workbook option.
3. When a blank workbook opens, click File > Options.
4. Under the Formulas category, pick Manual in the Calculation options section, and then click OK.

Figure 3 – Select Manual in Calculation options

1. Now, again click on the File menu and then click Open.
2. Navigate to the corrupt workbook, and double-click it.

When the workbook opens, check if it contains all the data. If not, proceed to the next tip.

Tip #3: Copy Excel Workbook Contents to a New Workbook

Several users have reported that they were able to fix ‘We found a problem with some content in ’ error message by copying contents from the corrupt workbook to a separate workbook. Detailed steps are as follows:

1. Open the Excel workbook in ‘read-only’ mode, and copy all its contents.
2. Create a blank new workbook and paste the copied contents from the corrupt file to the new file.

Tip #4: Use External References to Link to the Damaged Workbook

Use external references to link to the corrupted workbook. By implementing this fix, data contents can be retrieved. However, it is not feasible to recover formulas or calculated values using this solution.

Follow the steps below:

1. In Excel 2013/2016, click File > Open.
2. Navigate to the folder where the corrupt file is saved.
3. Right click the file, select Copy, and then click on Cancel.
4. Again, click on File and then New.
5. Under New option, click on Blank workbook.
6. In the cell A1 of new workbook, type =File Name!A1 (where File Name indicates the name of the damaged workbook being copied in Step 3).
7. If Update Values dialog box appears, click the corrupt workbook, and choose OK.
8. If Select Sheet dialog box appears, click the appropriate sheet, and then click OK.
9. Select cell A1.
10. Next, click Home, and then click Copy (or, press Ctrl +C).
11. Starting in cell A1, select area approximately the same size as that of the cell range that contains data in the damaged workbook.
12. Next, click Home and select Paste (or click Ctrl + V).
13. Keep the range of cells selected, click Home and then Copy.
14. Finally, click on Home, click on the arrow associated with Paste and under Paste Values click on Values.

This will remove the link to the corrupt workbook and will retrieve data. But, keep in mind, the recovered data will no longer contain formulas or calculated values.

Alternative Solution – Stellar Repair for Excel

If the above manual methods fail to fix the ‘We found a problem with some content in Excel error’, try using the Stellar Repair for Excel software to resolve this error. The software helps repair and recover corrupt Excel files in just a few clicks. It can be used on a Windows 10/8/7/Vista/XP/NT machine to repair a corrupted workbook and recover every single bit of data from all the versions of the Excel workbook.

Read this: How to repair corrupt Excel file using Stellar Repair for Excel?

Conclusion

In this blog, we discussed some possible reasons behind Microsoft Excel 2013/2016 ‘We found a problem with some content’ error. The error may occur when an Excel file becomes corrupt. You may try repairing the corrupted Excel file manually by using the built-in ‘Open and Repair’ feature. Or, try the manual workarounds to extract data from the corrupt file discussed in this post. If the manual solutions don’t work for you, using Stellar Repair for Excel can come in handy in repairing the corrupt Excel (.xls/.xlsx) file and recovering the complete file data.

Fix the Too many different cell formats Error in Excel?

Excel has set a limit on the number of unique cell formats within a workbook. Excel 2003 allows up to 4000 different cell format combinations, whereas Excel 2007 and later versions allow a maximum of 64000 combinations. When this limit exceeds, you may encounter errors, such as “Too many different cell formats”. It can prevent you from inserting or modifying workbook rows or columns. Sometimes, it prevents you to copy and paste the content within the same or different workbooks.  This error may also occur due to various other reasons.

You can encounter the “Too many different cell formats” error due to the below reasons:

• Formatting is missing in the workbook.
• Size of your Excel file has increased due to excessive use of complex formatting (conditional formatting).
• Workbook contains a large number of merged cells.
• There are multiple built-in or custom cell styles.
• Excel workbook is corrupted.
• The unused styles are unexpectedly copied to new workbooks (when moving or copying a worksheet from one to another).
• Workbooks contain multiple worksheets with different cell formatting.

Methods to Fix the “Too many different cell formats” Error in Excel

First, check that your Excel application is up-to-date. It helps in preventing duplicate styles in workbooks. If the error persists, then follow the below methods:

Method 1: Simplify the Workbook Formatting

You can face the error in Excel - Too many different cell formats, if the size of your Excel file has increased due to excessive or unnecessary formatting. You can try to simplify the formatting of the affected workbook. While reducing the number of formatting combinations, you can follow the simplifying guidelines, such as using a standard font and applying borders consistently. Follow the below steps to remove unnecessary formatting in your worksheet:

• First, open the affected worksheet.
• Now, use the shortcut key (Ctrl+A) to select all the cells.
• In the Excel ribbon, navigate to the Home tab and click Clear.

• Then, select the Clear Formats option.

The above steps will remove all unnecessary formatting from the selected cells, thus reducing the number of cell formats. Besides this, you can try removing the cell patterns (if any) or use cell styles  to remove unnecessary formatting in the workbook.

Method 2: Remove Conditional Formatting

Conditional formatting is also one of the reasons behind the “Too many different cell formats” error. It usually occurs if you have applied multiple rules to various cells or cell ranges within a workbook. Each rule has its own formatting settings. If you’ve applied a large number of conditional formatting to cells, it can increase the number of unique cell formats. You can check and remove the unnecessary conditional formatting. Here are the steps to do this:

• Open the Excel file in which you are getting the error.
• Go to the Home tab and locate Conditional Formatting.

• Select Manage Rules.

• The Conditional Formatting Rules Manager wizard is displayed. You can check the formatting rules and delete the unnecessary rule by clicking on the Delete Rule option.

Method 3: Repair your Excel Workbook

Corruption in the Excel workbook can also cause the “Too many different cell formats” error. You can try the Microsoft inbuilt utility to repair the file. Follow these steps to use this utility:

• Open your Excel application. Go to File > Open.
• Click Browse to choose the affected workbook.
• The Open dialog box will appear. Click on the corrupted file.
• Click the arrow next to the Open button and then select Open and Repair.
• You will see a dialog box with three buttons - Repair, Extract Data, and Cancel.

• Click on the Repair button to recover as much of the data as possible.
• After repair, a message is displayed. Click Close.

If the Open and Repair utility does not work or fails to repair the corrupted Excel file due to any reason, then you can use Stellar Repair for Excel to repair the Excel file. It is a simple-to-use third-party Excel repair tool with an intuitive UI that enables anyone to use it without much effort. The tool can help in fixing the “Too many different cell formats” error. It does so by repairing the Excel (XLS/XLSX) file and recovering all the components, including damaged cell style, without impacting the original formatting. You can download the software’s demo version and install it to check how it works.

Method 4: Save the Excel File to a Binary Workbook (.xlsb) Format

You can also get the “excel too many cell formats” error if the size of the spreadsheet is too large. You can try saving the Excel file in binary (.xlsb) format to reduce the Excel file size. Here’s how to do so:

• In Excel, navigate to File > Save As.
• Select Excel Binary Workbook (*.xlsb) in the Save as type dialog box.

• Click Save.

Some Additional Solutions

Here are some additional methods you can try to fix the issue:

1. Check and Fix the Un-used Style Copy Issue

Many users have reported encountering the “Too many different cell formats” error when moving or copying the content of a workbook from one Excel to another and the unused styles being copied from one workbook to another. Microsoft has released a hotfix package which contains a fix for this issue. You can install this hotfix package (2598143 ) to resolve the issue.

2. Use Clean Excel Cell Formatting Option

You can check and enable the Excel cell formatting option to fix the “Too many cell formats” issue. This option will help you remove the excess formatting  in your workbook. To locate this option, click on the Inquiabove steps willre tab. If you fail to see the Inquire tab, then check if the Inquire option is enabled in the Excel Com Add-ins settings.

3. Clean up Workbooks using Third-Party Tools

The “Too many different cell formats” issue can occur if your workbook contains a large number of unnecessary styles, as mentioned above. You can use third-party tools, such as XLStyles Tool   or Remove Styles Add-in  to clean up workbooks recommended in Microsoft Guide. However, Microsoft takes no guarantee of these tools.

Closure

If you’re getting the “Too many different cell formats” error in Excel, try the methods discussed in this post to resolve it. You can simplify the formatting by following standardized guidelines and clearing all the unnecessary conditional formatting. If the error has occurred due to corruption in Excel file, then you can use Stellar Repair for Excel to repair the Excel file. It is an advanced tool that can repair Excel worksheet and recover all its objects without losing the original formatting.

Ways to Fix Personal Macro Workbook not Opening Issue

Many users have reported encountering issues while accessing personal macro workbook, such as personal macro workbook not opening, personal macro workbook not loading automatically, Excel personal macro workbook keeps getting disabled, etc.

Such issues may arise due to a problem with the directory where the personal workbook is stored. However, there are various other reasons that may lead to such issues. Below, we’ll discuss the reasons behind the personal macro workbook not opening issue and the solutions to troubleshoot and fix the issue. But before proceeding, let’s understand why personal macro workbook is used.

Why Personal Macro Workbook is used?

You can access macros in a specific Excel workbook. However, when you need to use the same macro in other Excel worksheets, then you can create a personal macro workbook. A personal macro workbook (Personal.xlsb) is a hidden workbook that is used to store all macros. It makes your macros available every time you open Excel.

Causes of Personal Macro Workbook not Opening Issue

You may encounter personal macro workbook is not opening issue when attempting to record macros. Some possible causes behind such an issue are:

• Personal macro workbook is stored at an untrusted location
• Location of xlsb is changed
• Personal macro workbook is hidden
• Personal macro workbook becomes corrupted
• Disabled items in add-ins
• Workbook is Read-only

Methods to Fix the “Personal Macro Workbook not Opening” Issue

 Follow the given methods to fix the personal macro workbook is not opening issue:

Method 1: Check the Path of Personal.xlsb

The personal macro workbook (Personal.xlsb) file is stored in XLStart folder. It opens automatically when you open your Excel application. However, sometimes it fails to load automatically. It usually occurs when you try to open the file from an incorrect path. You can check the path of Personal.xlsb by following these steps:

• Open the workbook.
• Click on the Developer tab.

• Press Alt + F11 to open Visual Basic Editor.
• Go to View > Immediate Window.

• In Immediate Window, type the following code to know the location of the workbook:

?thisworkbook.path.

• Then, hit Enter.

• You will see the path of the personal macro workbook.
• Copy the path and paste it into Quick Access field in File Explorer.

Method 2: Unhide Personal Macro Workbook

If personal macro workbook is hidden, you may unable to see and open the Personal.xlsb file. To unhide the personal Macro workbook, follow the below steps:

• In Microsoft Excel, go to View and then click Unhide

• The Unhide dialog box is displayed. Click PERSONAL and then OK.

Method 3: Enable the Macro Add-ins

You may unable to open the previously recorded macros in your personal macro workbook if the macros are disabled. To check and enable the items, follow these steps:

• Go to File > Options.
• In Excel Options, click on the Add-ins
• Select Disabled Items from the Manage section and click on Go.

• The Disabled Items dialog box appears. Click on the disabled item and then click Enable.

Method 4: Change the Trusted Location

You may encounter the “personal macro workbook not opening” issue if the Personal.xlsb file is stored at an untrusted location. You can check and modify the path of XLSTART folder using the Trust Center window. Here are the steps:

• Open MS Excel. Go to File > Options.
• Click Trust Center > Trust Center Settings.
• In the Trust Center Settings dialog box, click on Trusted Locations.

• Verify the path of the XLSTART If it is untrusted or there is any issue, then click Modify and then click OK.

Method 5: Repair your Excel File

You may fail to open personal macro workbook if it is corrupted. To repair the corrupt workbook, you can use the built-in Open and Repair utility in MS Excel. To use this tool, follow these steps:

• Open your Excel application.
• Click File > Open.

• Browse to the location where the corrupted file is stored.
• In the Open dialog box, select the corrupted workbook.
• From the Open dropdown list, click Open and Repair.

The dialog box appears with the Repair and Extract buttons. Click Repair to retrieve all possible data or the Extract option to recover the data without formulas and values.

If the Open and Repair utility fails to repair the corrupted Excel workbook, then you can use a professional Excel repair tool, such as Stellar Repair for Excel. It can easily repair severely corrupted Excel (XLSX and XLS) files and recover all the components. You can download the free trial version of the tool to preview the recoverable data.

Closure

This article discussed the ways to fix the personal macro workbook not opening issue. In case you are unable to open the personal macro workbook because of corruption in the workbook, you can use the Open and Repair utility in MS Excel. If it fails, then you can use Stellar Repair for Excel to fix corruption in the Excel file and recover all its data with complete integrity.

Also read: