How to recover data from dead iPhone

Summary: Recovering data from a dead iPhone is precarious if you don’t acquire knowledge about your iOS device. Be wary of how your device works and its data backup options to avert data loss problems in the future. If your iPhone has turned dead because of a major technical glitch, you can recover the data stored in it using a reliable data recovery software. This blog encapsulates all such concrete details with a step-by-step guide to recover data from dead iPhone.

iPhone is one of the most affluent smartphones loaded with advanced features. Most people invest in it because its upbeat features and advanced technology intrigue them. Every time Apple announces a new upgrade or introduces new features to its iOS software upgrade, iPhone fans dig deep to learn more about it.

If your iPhone is dead and not working at all, and you want to learn how to recover data from dead iPhone, this blog is exclusively for you.

Why would an iPhone suddenly go dead?

These are the possible reasons why iPhone turns dead or blank for hours:

1. A defective charging cable or adapter that doesn’t perfectly pair with your iOS device.
2. A recent iOS update that triggered some unforeseen software error in your iPhone.
3. Faulty or failed hardware, like a battery or a logic board that needs to be replaced.

In either of the above-mentioned conditions, your iPhone will stop responding to any command. Turning the device off and restarting works in rare circumstances, but not always. In such bleak situations, you can try to fix your dead iPhone using these tips:

• Keep a close watch over the charging cable or power adapter and fix the loose ends.
• Put your dead iPhone on charge for at least an hour.
• Connect your iPhone to iTunes or put it on Device Firmware Update (DFU) mode.
• Seek immediate assistance from Apple Support Services.

If these attempts won’t bring your iPhone back to life, certainly it has some major technical glitch that only Apple experts can address. Before submitting your device for the same, recover all the data stored in it. Follow these DIY solutions to recover data from dead iPhone:

Use iTunes to Recover Data from Dead iPhone

iTunes is one of the most coveted options to recover data recovery from dead iPhone. However, to use this method, your iPhone should be in sync with iTunes, and you have to periodically take data backup on it. Observe the steps to keep data backup on iTunes:

• Connect your iPhone to your computer and open iTunes to login.
• From the menu bar at the top of the iTunes window, select File > Library > Organize Library.
• Next, select Consolidate files to organize the Library screen and press OK.
• Once you do that, copies of any files that were not in the iTunes Media folder will be added to your iTunes Media folder.
• At the same time, take the opportunity to eliminate all the duplicate files taking unnecessary space on your hard drive. However, before making this move, save a copy of the original files in your iTunes Media Folder.

If you have been practicing the above steps for long, then simply connect your device with your computer using a USB cable and follow steps to recover data from iTunes backup:

• Connect your iPhone to your computer and open iTunes.
• Select your iPhone in the main iTunes window or select it from Finder.
• The move will prompt a new set of instructions on iTunes with options to backup data. You need to click on Restore Backup to retrieve your dead iPhone’s data.
• Several backup options will prompt on your computer. You can choose a selected set of files to restore a specific file or all of them.
• Once selected, the desired number of files/data to restore, press Restore, and wait. The move may restart your iPhone. If not, your device will suffer a more serious hardware failure that only technical experts can fix.

Pro Tip: If found dead, let your iPhone remain off for as long as possible to avoid data overwriting.

Use iCloud to Recover Data from Dead iPhone

If you are proactively using iCloud to maintain data backup, there is a fair chance to recover your dead phone’s data from it. You can directly recover data from iCloud on another iPhone that doesn’t necessarily require connection to a laptop or computer. All you need is an iPhone that can be turned on at least and let you through the initial steps to login to your iCloud. Don’t forget to erase your dead iPhone before continuing on the new one; otherwise, you won’t get to perform the initial set-up. Follow the steps below to restore dead iPhone’s data from iCloud Backup:

• Turn on the working iPhone and perform the initial setup procedures till you get through Apps & Data. Tap on Restore from iCloud Backup option and sign in with your Apple ID.

• A window will prompt you with all backups available for restoring. Select the most recent one that contains all the data you wish to retrieve from your dead iPhone.
• Patiently wait for the data transfer procedure to finish.
• In the data transfer procedure, at some point, you might be asked to enter your Apple ID once again. Enter details to keep the action going.
• Once done, you’ll get a notification of successful data transfer.

You can also transfer all your dead iPhone data to a new one by inserting its SIM card in the new iPhone. Learn here how to Transfer Data from Old iPhone to New iPhone .

Use a Reliable Data Recovery Software

Your last respite is a professional data recovery software in case a vast amount of data from dead iPhone, like photos, videos, messages, contacts, etc., remain missing after iCloud recovery. We recommend Stellar Data Recovery for iPhone because it guarantees absolute recovery of lost or deleted data from iPhone, iTunes, and iCloud. Listing some common situations where the software can help:

• If iTunes fails to restore data after unlocking the disabled iPhone.
• If some data is found missing after restoring data from iTunes or iCloud.
• Instead of restoring all files from the iPhone, you wish to recover only some selected files.

You can download the demo version of the software for assessment and buy the software to activate its key functionalities. It will activate via activation key that will be sent on your email once you purchase the software. Read this KB to learn How to Activate Stellar Data Recovery for iPhone . Additionally, using the Toolkit version of the software, identified as Stellar Eraser for iPhone , you can permanently remove all the sensitive data stored in your dead iPhone so it won’t fall into the wrong hands.

Conclusion:

Avid iPhone users know when to stop playing with their iOS device to let it reset in case of a technical glitch. Nevertheless, not all iPhone users are aware of this practice. Consequently, we panic and keep on switching off and on our smartphones when it hangs.

If your phone turns blank or dead, don’t panic and stop using your device for some time. Let it rest and resume its function. Otherwise, you’ll end up losing all the memories stored in it. This blog aimed to help you understand the grim consequences and smart ways to recover data from iPhone if your device turns dead. In case you are unable to recover data on your own using Stellar Data Recovery for iPhone, you can avail Data Recovery Lab-Services where our experts can recover all the data from your dead iPhone.

FAQs:

What to do if iPhone is not working?

If your iPhone has stopped responding to any command and you can’t even turn it off, then force shutdown and restart it. Swiftly press and release the volume up button first and repeat the same with volume down button. Now, press and hold the side button and once the Apple logo appears on the screen, release the side button too.

Why is my phone unresponsive?

Your iPhone’s touchscreen can be unresponsive for reasons like a brief hiccup or glitch that your smartphone’s inner system can’t detect or render it unresponsive. Sometimes, touch screen becomes unresponsive due to water damage or app glitch, or virus attack.

Why did my iPhone screen go black?

In iPhone, black screen appears due to software or hardware issues. Firmware modifications, dropping the iPhone, iOS upgrade/downgrade, and jailbreaking, are some other common reasons behind the black screen error. Learn some great solutions to overcome the black screen of death error .

Solved: Mac Doesn’t Recognize my iPhone

Summary: Is your Mac not recognizing the iPhone? Learn the 9 ways to fix iPhone not showing up on Mac. You can apply these methods for all iPhone models not recognized by macOS Ventura, Monterey, Catalina, Big Sur, High Sierra and below versions.

You may want to backup iPhone data or transfer favorite photos, music, or videos to Mac. But sometimes your Mac computer doesn’t detect the iPhone when you try to connect it. There are so many complaints such as iPhone not showing up in Finder in Ventura, Monterey, Catalina or Macbook not recognizing iPhone 14. Some also reported an unknown error or a 0xE error when trying to connect iPhone to Mac computer. The situation is frustrating as it prevents you to sync iPhone to macOS and access iPhone data on Mac.

No worries. There are methods, which can fix the issue and let you again access your iPhone on Mac. But, first you should be aware why Mac fails to recognize your iPhone as this helps in troubleshooting the problem.

Why your iPhone not detected by Mac computer?

Mac does not detect your iPhone due to many reasons, such as

• iPhone is not ‘on’ when connected to Mac.
• iPhone is damaged.
• The USB cable or USB port is not working.
• Software updates are pending including iOS, iTunes, and macOS.
• Third-party software conflict wherein 2 programs arecompeting for the same memory, peripheral device etc., on your Mac.
• Firewall or Antivirus software is preventing Mac to recognize iPhone.
• Mac settings don’t allow to view iPhone in Finder.

1. Check your iPhone

Before you connect your iPhone to Mac, make sure the iOS device is unlocked and on the Home screen.

2. Fix USB connection

When Mac computer doesn’t recognize iPhone, first check your USB connection. The USB cable or the port can be faulty. Try to connect iPhone to Mac using another Apple USB 2.0 cable. If that doesn’t work try with the different port. Plus, disconnect other USB devices from Mac except your iPhone.

3. Restart your iPhone

Restarting the iOS device would resolve any issue between your iPhone programs and iTunes. To restart hold volume/side/ top button depending on your iPhone model. Slide the red power off slider on your iPhone. Wait for your iPhone to turn off. After a few seconds, again restart iPhone. Now Mac should recognize your iPhone.

4. Restart your Mac

Restarting Mac clears the cache and memory of your system giving it a fresh start. It also installs pending updates.

5. Update your macOS

When iPhone is not showing up on Mac Finder but you can see it under USB Device Tree, update the macOS to the latest version. Make sure there are no pending software installs.

To check the USB Device Tree on Mac follow the below steps:

• Click on Apple icon followed by About This Mac.
• Click the System Report button.
• Under Hardware, select USB.

_{Figure: USB Device Tree}

• On the right pane, you will see USB Device Tree. If you see your iPhone in the list, then update to the latest macOS.

6. Update iTunes

Older versions of iTunes can create conflict with normal Mac functions. Hence, Apple recommends installing the latest iTunes updates.

To install the latest iTunes, open iTunes. From the menu bar choose Help > Check for Updates and follow the prompts to install the latest version.

Now, check if your Mac recognizes the iPhone or not.

7. Disable antivirus on Mac

One of the reason cited for iPhone not detected by Mac is anti-virus or firewall protection on your system. So disable the antivirus or firewall and then try to connect your iPhone to Mac.

8. Enable iOS device in Mac Preferences

When iPhone is not showing on Mac Finder, check if your Mac Preferences allows to view iOS devices in Finder. To enable iOS device in Finder follow the below steps:

• Go to Finder > Preferences.
• Click on the Sidebar button in Finder Preferences box.
• Check in CDs, DVDs and iOS Devices.

_{Figure: Finder Preferences}

This should fix iPhone not showing up in Finder on Mac.

9. Connect iPhone to a different Mac machine

Try by connecting your iPhone to another Mac. If you receive a message asking to ‘Trust this computer’, click on ‘Trust’ to access your iPhone data on the new computer. Make sure to backup iPhone to avoid data loss situation.

Tip: Have you lost or accidentally deleted Camera Roll, Contacts, Photos Stream, Voice Memos, or more while transferring iPhone data to Mac? No need to worry. Restore the deleted photos, videos, messages, contacts, etc., with the help of an efficient Stellar Data Recovery for iPhone for Mac.

FAQ

1. Can I connect iPhone with Mac wirelessly?

You can sync your Mac and iPhone over the same Wi-Fi network.

1. Connect your iPhone to Mac using a USB cable.
2. Open Finder on Mac and select your iPhone in the sidebar.
3. Click on the General tab.
4. Check in Show this iPhone when on Wi-Fi.
5. Click Apply.

2. How to fix my iPhone cannot connect to iTunes?

If iPhone is not showing up in iTunes, restart your devices and ensure macOS, iTunes, and iOS are updated. To know more methods, read How fix iPhone unable to connect to iTunes problem.

3. How to connect iPhone to the latest MacBook Pro 2021 that doesn’t have USB A port?

The new MacBook has USB Type-C port. You can use USB-C to Lightning cable to connect iPhone XR, SE, 11, and above to the new MacBook. If you have iPhone X or below use USB-A to Lightning cable.

4. Can I use the methods to fix iPhone 14 not recognized by macOS Ventura?

Yes, you can apply the above methods to fix any iPhone not detected by macOS Ventura, Monterey, Big Sur, Catalina, or below.

5. Will I lose any data when syncing iPhone and Mac?

No, you won’t lose data by syncing iPhone to Mac. Syncing helps to access your iPhone data on Mac anytime from anywhere. However, if you accidentally delete iPhone data, use an iPhone Data Recovery software to restore it.

Wrapping Up

Syncing iOS device to macOS has so many advantages but if Mac is not recognizing your iPhone, you cannot transfer, back up, or access iPhone data on Mac. This post has shared 9 methods to fix the syncing issue of Mac and iPhone. One of them should resolve Mac not detecting your iPhone.

Apple will delete your photos in July. Here’s what you should do

Apple has recently announced that it will permanently delete photos from its users’ ‘My Photo Stream’ this month. This news has come as a surprise to the Apple community, as users struggle to understand the implications of this announcement and what necessary precautions can be taken. In this blog post, we will get into the details of this new move by Apple, explore the reasons behind it, and provide tips on how iPhone/iPad/Mac users can safeguard their precious photos.

The Announcement

_”_My Photo Stream is scheduled to be shut down on July 26, 2023. As part of this transition, new photo uploads to My Photo Stream from your devices will stop one month before, on June 26, 2023.

The photos in My Photo Stream are already stored on at least one of your devices, so as long as you have the device with your originals, you won’t lose any photos as part of this process. If a photo you want isn’t already in your Library on a particular iPhone, iPad, or Mac, make sure that you save it to your Library on that device…” Read more

What is Apple’s My Photo Stream?

My Photo Stream, launched in 2011, was designed to sync photos across multiple Apple devices such as iPhone, iPad, or Mac.

This feature automatically stores your most recent pictures (up to 1000) for approx. 30 days so you can view and download them easily from other Apple devices. After this period, photos are removed from My Photo Stream but remain in your device’s Photos app. However, this only shows photos and not your live images or videos.

How to Protect Your ‘My Photo Stream’ Pictures?

Apple, known for its commitment to user privacy and data security, has recommended several preventive measures to mitigate the risk of losing any important photo due to this update.

1. Move My Photo Stream images to your Library

Even if the pictures in My Photo Stream are already there on at least one of your Apple devices, you must save these pictures to your Photo Library to avoid losing them**.** Here’s how to copy My Photo Stream pictures to your Photo Library:

On your iPhone, iPad, or iPod Touch:

• Open the Photos app and tap Albums.
• Tap on My Photo Stream > Select.
• Select all the photos you want to save, then tap the Share button > Save Image.

On your Mac:

• Open the Photos app and then open the My Photo Stream
• Select the photos you want to save which aren’t currently in your photo library.
• Drag and drop them from the My Photo Stream album into your Library.

2. Move to iCloud Photos

To preserve your My Photo Stream images in their original and high-resolution version, you can transfer them to iCloud Photos.

If you already have an iCloud account, just enable iCloud Photos to automatically upload & sync every photo and video you capture on the device, making them accessible from anywhere.

To use the iCloud Photos service, you will require the following:

• iPhone running iOS 8.3 or later version.
• iPad with iPadOS 8.3 or later version.
• Mac running OS X Yosemite or later version.

How to set up iCloud Photos on your iPhone, iPad, or iPod touch?

• On your iPhone, iPad, or iPod touch, go to Settings.
• Next, click on [Your Name] > iCloud.
• Tap on Photos and do the following:

For iOS 16, iPadOS 16, or later versions: Toggle on the ‘Sync this [device]‘ option.

For iOS 15, iPadOS 15, or earlier versions: Turn on the iCloud Photos

How to set up iCloud Photos on your Mac?

• On your Mac, go to Apple Menu and click on System Preferences.
• Click Apple ID and then select iCloud in the sidebar.
• Now, select Photos and turn on the switch next to Sync this Mac.

**

**

Don’t want to use iCloud Photos?

While iCloud Photos is a convenient option for many Apple users, it’s important to acknowledge that it is not the best fit for everyone. Limited free storage of 5GB or lack of cross-platform compatibility can compel Apple users to look for other alternatives.

Storage options, such as Google Photos, Microsoft OneDrive, Dropbox, external hard drives, etc., are available to ensure your iPhone Photos are safe and easily accessible.

The Bottom Line

Apple’s announcement of the potential discontinuation of My Photo Stream has understandably caused worry among its users. While a specific reason for this action remains undisclosed, they are actively addressing the issue to prevent data loss. In the meantime, iPhone users must take precautionary measures to safeguard their photos. They can simply move the My Photo Stream images to the Photo Library, iCloud Photos, or other backup folders.

How to Fix iPhone Stuck at ‘attempting data recovery’ Loop

Summary: If your iPhone gets stuck at ‘attempting data recovery’ loop screen while updating iOS, learn how to fix iPhone failed iOS update error and efficiently recover lost data using Stellar Data Recovery for iPhone.

Since the release of iOS 16, there are frequent complaints about flood updates leading to the ‘attempting data recovery’ loop. Moreover, users are concerned about data loss in such situations.

Users globally reported that their iPhone gets stuck in the ‘attempting data recovery’ loop while trying to install iOS updates. The issue occurs when they update to iOS 16 versions by using iTunes. It leaves the update in the lurch and erases some or all data from their iPhone.

iOS updates breathe new life into your device. However, the truth is that Apple’s every update brings some bug or new problem, like this one.

Read this post further if your iPhone screen gets stuck at the ‘attempting data recovery’ loop during an iOS update.

It shares how to fix iPhone ‘attempting data recovery’ failed problem and recover lost iPhone data in any case.

You can apply the methods on iPhone 14, 13, 12, SE, 11, XS, XR, X, 8, 7, 6, 5, and 4 series. They are relevant to iOS 16 and below versions.

Common causes of ‘attempting data recovery’ loop on iPhone

The attempting to data recovery failed problem usually occurs when iOS is updated with iTunes. The ‘attempting data recovery’ screen takes a long time and is often followed by a prompt ‘press home button to restore.’

Some of these occurrences were reported in the following scenarios:

• Users unplugged the iPhone from a PC or Mac during the update
• Downgrading from iOS 16 to 15 or below
• Updating iOS after jailbreak

How to fix iPhone stuck at the ‘Attempting Data Recovery’ loop

1. Force Restart iPhone
2. Put iPhone into Recovery Mode

Method 1: Force Restart iPhone

It’s essential to know that a force restart differs from a normal Restart. A force restart is advised when iPhone is not in its normal working condition. It is either hanged or stuck at the Apple logo or another screen in Recovery Mode or Restore Mode. It cuts the power and turns on the iPhone again. Force restart usually fixes many iPhone issues.

Steps to Force Restart iPhone 8 and earlier:

• Press and fast release the Volume Up button
• Press and fast release the Volume Down button
• Press and hold the Side button (power) until the Apple logo appears

Steps to Force Restart iPhone X and later:

• Press and quickly release the Volume Up button
• Press and quickly release the Volume Down button
• Press and hold the Side button until you see the recovery-mode screen.

Method 2: Put iPhone into Recovery Mode

If Force Restart doesn’t help, try this method. Recovery Mode helps in cases of failed iOS updates. Thus, whenever the iOS updates, the iPhone gets stuck at the ‘attempting data recovery,’ op put the device on Recovery Mode.

[Caution]: Recovery Mode erases the iPhone data, which can be restored with the help of iTunes backup. So, make sure that the iTunes version is the latest.

Steps to put iPhone on Recovery Mode:

1. Connect iPhone to computer
2. Open iTunes
3. Force restart iPhone (with steps mentioned above)
4. A dialog box appears. Select Update

5. After the Update process completes, set up your iPhone.

Fixed ‘attempting data recovery’ failed problem. Further, how to restore data on iPhone

Recovery Mode, though fixes iPhone’s ‘attempting data recovery’ issue but at the same time erases all information from the device. You can restore iPhone data from iTunes backup or iCloud backup.

In case, iTunes/iCloud backups are not able to restore iPhone or you discover that some of the data is still missing after restoring the device, choose Stellar Data Recovery for iPhone .

The software is also helpful when you don’t want to recover all the data from iTunes or iCloud unnecessarily. Instead, it. It lets you recover precisely what you want, by allowing you to choose specific files like photos, videos, WhatsApp chats, or memos, Calendar, etc., and restoring them on the device.

Additionally, Stellar Data Recovery for iPhone also restores the data lost and deleted after jailbreak, water damage, a Black screen of death, iPhone stuck at Apple logo , screen damage iPhone, factory reset, etc. It supports recovery from iPhone 15, 14, 13, 12, SE, 11, XS, XR, X, 8, 7, 6, 5, and 4 series.

Steps to Restore Data on iPhone with Stellar Data Recovery of iPhone

• Download Stellar Data Recovery for iPhone on PC/ Mac
• Connect iPhone to the computer
• Select iTunes from the software screen
• Follow the simple on-screen instructions

Wrapping Up

Users look forward to iOS updates. However, the experience can get irritating, when iPhone software updates fail. For example, iPhone ‘attempting data recovery’ loop is a common problem faced after attempts to upgrade to the latest iOS 16.

Force restart of the device often resolves the ‘attempting data recovery’ loop issue. If this doesn’t work, further try to get your iPhone on Recovery Mode. Later restore data via iTunes or Stellar Data Recovery for iPhone. The software approach is straightforward and lets you select and restore the informathat you want.

Also read: