How to recover data from dead iPhone

Summary: Recovering data from a dead iPhone is precarious if you don’t acquire knowledge about your iOS device. Be wary of how your device works and its data backup options to avert data loss problems in the future. If your iPhone has turned dead because of a major technical glitch, you can recover the data stored in it using a reliable data recovery software. This blog encapsulates all such concrete details with a step-by-step guide to recover data from dead iPhone.

iPhone is one of the most affluent smartphones loaded with advanced features. Most people invest in it because its upbeat features and advanced technology intrigue them. Every time Apple announces a new upgrade or introduces new features to its iOS software upgrade, iPhone fans dig deep to learn more about it.

If your iPhone is dead and not working at all, and you want to learn how to recover data from dead iPhone, this blog is exclusively for you.

Why would an iPhone suddenly go dead?

These are the possible reasons why iPhone turns dead or blank for hours:

1. A defective charging cable or adapter that doesn’t perfectly pair with your iOS device.
2. A recent iOS update that triggered some unforeseen software error in your iPhone.
3. Faulty or failed hardware, like a battery or a logic board that needs to be replaced.

In either of the above-mentioned conditions, your iPhone will stop responding to any command. Turning the device off and restarting works in rare circumstances, but not always. In such bleak situations, you can try to fix your dead iPhone using these tips:

• Keep a close watch over the charging cable or power adapter and fix the loose ends.
• Put your dead iPhone on charge for at least an hour.
• Connect your iPhone to iTunes or put it on Device Firmware Update (DFU) mode.
• Seek immediate assistance from Apple Support Services.

If these attempts won’t bring your iPhone back to life, certainly it has some major technical glitch that only Apple experts can address. Before submitting your device for the same, recover all the data stored in it. Follow these DIY solutions to recover data from dead iPhone:

Use iTunes to Recover Data from Dead iPhone

iTunes is one of the most coveted options to recover data recovery from dead iPhone. However, to use this method, your iPhone should be in sync with iTunes, and you have to periodically take data backup on it. Observe the steps to keep data backup on iTunes:

• Connect your iPhone to your computer and open iTunes to login.
• From the menu bar at the top of the iTunes window, select File > Library > Organize Library.
• Next, select Consolidate files to organize the Library screen and press OK.
• Once you do that, copies of any files that were not in the iTunes Media folder will be added to your iTunes Media folder.
• At the same time, take the opportunity to eliminate all the duplicate files taking unnecessary space on your hard drive. However, before making this move, save a copy of the original files in your iTunes Media Folder.

If you have been practicing the above steps for long, then simply connect your device with your computer using a USB cable and follow steps to recover data from iTunes backup:

• Connect your iPhone to your computer and open iTunes.
• Select your iPhone in the main iTunes window or select it from Finder.
• The move will prompt a new set of instructions on iTunes with options to backup data. You need to click on Restore Backup to retrieve your dead iPhone’s data.
• Several backup options will prompt on your computer. You can choose a selected set of files to restore a specific file or all of them.
• Once selected, the desired number of files/data to restore, press Restore, and wait. The move may restart your iPhone. If not, your device will suffer a more serious hardware failure that only technical experts can fix.

Pro Tip: If found dead, let your iPhone remain off for as long as possible to avoid data overwriting.

Use iCloud to Recover Data from Dead iPhone

If you are proactively using iCloud to maintain data backup, there is a fair chance to recover your dead phone’s data from it. You can directly recover data from iCloud on another iPhone that doesn’t necessarily require connection to a laptop or computer. All you need is an iPhone that can be turned on at least and let you through the initial steps to login to your iCloud. Don’t forget to erase your dead iPhone before continuing on the new one; otherwise, you won’t get to perform the initial set-up. Follow the steps below to restore dead iPhone’s data from iCloud Backup:

• Turn on the working iPhone and perform the initial setup procedures till you get through Apps & Data. Tap on Restore from iCloud Backup option and sign in with your Apple ID.

• A window will prompt you with all backups available for restoring. Select the most recent one that contains all the data you wish to retrieve from your dead iPhone.
• Patiently wait for the data transfer procedure to finish.
• In the data transfer procedure, at some point, you might be asked to enter your Apple ID once again. Enter details to keep the action going.
• Once done, you’ll get a notification of successful data transfer.

You can also transfer all your dead iPhone data to a new one by inserting its SIM card in the new iPhone. Learn here how to Transfer Data from Old iPhone to New iPhone .

Use a Reliable Data Recovery Software

Your last respite is a professional data recovery software in case a vast amount of data from dead iPhone, like photos, videos, messages, contacts, etc., remain missing after iCloud recovery. We recommend Stellar Data Recovery for iPhone because it guarantees absolute recovery of lost or deleted data from iPhone, iTunes, and iCloud. Listing some common situations where the software can help:

• If iTunes fails to restore data after unlocking the disabled iPhone.
• If some data is found missing after restoring data from iTunes or iCloud.
• Instead of restoring all files from the iPhone, you wish to recover only some selected files.

You can download the demo version of the software for assessment and buy the software to activate its key functionalities. It will activate via activation key that will be sent on your email once you purchase the software. Read this KB to learn How to Activate Stellar Data Recovery for iPhone . Additionally, using the Toolkit version of the software, identified as Stellar Eraser for iPhone , you can permanently remove all the sensitive data stored in your dead iPhone so it won’t fall into the wrong hands.

Conclusion:

Avid iPhone users know when to stop playing with their iOS device to let it reset in case of a technical glitch. Nevertheless, not all iPhone users are aware of this practice. Consequently, we panic and keep on switching off and on our smartphones when it hangs.

If your phone turns blank or dead, don’t panic and stop using your device for some time. Let it rest and resume its function. Otherwise, you’ll end up losing all the memories stored in it. This blog aimed to help you understand the grim consequences and smart ways to recover data from iPhone if your device turns dead. In case you are unable to recover data on your own using Stellar Data Recovery for iPhone, you can avail Data Recovery Lab-Services where our experts can recover all the data from your dead iPhone.

FAQs:

What to do if iPhone is not working?

If your iPhone has stopped responding to any command and you can’t even turn it off, then force shutdown and restart it. Swiftly press and release the volume up button first and repeat the same with volume down button. Now, press and hold the side button and once the Apple logo appears on the screen, release the side button too.

Why is my phone unresponsive?

Your iPhone’s touchscreen can be unresponsive for reasons like a brief hiccup or glitch that your smartphone’s inner system can’t detect or render it unresponsive. Sometimes, touch screen becomes unresponsive due to water damage or app glitch, or virus attack.

Why did my iPhone screen go black?

In iPhone, black screen appears due to software or hardware issues. Firmware modifications, dropping the iPhone, iOS upgrade/downgrade, and jailbreaking, are some other common reasons behind the black screen error. Learn some great solutions to overcome the black screen of death error .

How to Recover Lost Data from iTunes Backup File?

If you have lost iPhone data and are unable to restore it from the iTunes backup file, use Stellar Data Recovery for iPhone. The software quickly recovers lost or deleted iPhone data from iTunes.

Stellar Data Recovery for iPhone is the best iPhone data recovery tool to recover data from iTunes backup files. The tool uses a sophisticated algorithm, which scans through the entire backup file to recover data. You can easily restore saved iOS data like Messages, Call History, Calendar, Notes, etc., from the backup file.

Note: Make sure your Mac or PC is updated and you are using the latest version of iTunes.

Follow the below steps to recover lost data from iTunes backup file:

1. Launch ‘Stellar Data Recovery for iPhone’ tool on your computer.

    Figure: Home screen of Stellar Data Recovery for iPhone

2. Click ‘Recover iTunes Backup’ option on the left. The software scans the system for iTunes backup files and lists them along with the date of creation.

3. Select an iTunes backup from which you want to restore data.

  4. On the left pane, click on the type of data that you want to recover. You can restore Camera Roll, Photo Stream, Contacts, Messages, Message Attachments, Call history, Calendar, Reminder, Voice Memo, Notes, Notes Attachments, Safari Bookmarks, WhatsApp, WhatsApp Attachments, Line, Kik Viber, Tango, WeChat, and Apps Library.  

The software lets you preview, select, recover, and also search for specific photos, videos, messages, and other data.

5. Select what you want to recover and click on Save. Select a destination to save the iPhone data.

   

Solved: Mac Doesn’t Recognize my iPhone

Summary: Is your Mac not recognizing the iPhone? Learn the 9 ways to fix iPhone not showing up on Mac. You can apply these methods for all iPhone models not recognized by macOS Ventura, Monterey, Catalina, Big Sur, High Sierra and below versions.

You may want to backup iPhone data or transfer favorite photos, music, or videos to Mac. But sometimes your Mac computer doesn’t detect the iPhone when you try to connect it. There are so many complaints such as iPhone not showing up in Finder in Ventura, Monterey, Catalina or Macbook not recognizing iPhone 14. Some also reported an unknown error or a 0xE error when trying to connect iPhone to Mac computer. The situation is frustrating as it prevents you to sync iPhone to macOS and access iPhone data on Mac.

No worries. There are methods, which can fix the issue and let you again access your iPhone on Mac. But, first you should be aware why Mac fails to recognize your iPhone as this helps in troubleshooting the problem.

Why your iPhone not detected by Mac computer?

Mac does not detect your iPhone due to many reasons, such as

• iPhone is not ‘on’ when connected to Mac.
• iPhone is damaged.
• The USB cable or USB port is not working.
• Software updates are pending including iOS, iTunes, and macOS.
• Third-party software conflict wherein 2 programs arecompeting for the same memory, peripheral device etc., on your Mac.
• Firewall or Antivirus software is preventing Mac to recognize iPhone.
• Mac settings don’t allow to view iPhone in Finder.

1. Check your iPhone

Before you connect your iPhone to Mac, make sure the iOS device is unlocked and on the Home screen.

2. Fix USB connection

When Mac computer doesn’t recognize iPhone, first check your USB connection. The USB cable or the port can be faulty. Try to connect iPhone to Mac using another Apple USB 2.0 cable. If that doesn’t work try with the different port. Plus, disconnect other USB devices from Mac except your iPhone.

3. Restart your iPhone

Restarting the iOS device would resolve any issue between your iPhone programs and iTunes. To restart hold volume/side/ top button depending on your iPhone model. Slide the red power off slider on your iPhone. Wait for your iPhone to turn off. After a few seconds, again restart iPhone. Now Mac should recognize your iPhone.

4. Restart your Mac

Restarting Mac clears the cache and memory of your system giving it a fresh start. It also installs pending updates.

5. Update your macOS

When iPhone is not showing up on Mac Finder but you can see it under USB Device Tree, update the macOS to the latest version. Make sure there are no pending software installs.

To check the USB Device Tree on Mac follow the below steps:

• Click on Apple icon followed by About This Mac.
• Click the System Report button.
• Under Hardware, select USB.

_{Figure: USB Device Tree}

• On the right pane, you will see USB Device Tree. If you see your iPhone in the list, then update to the latest macOS.

6. Update iTunes

Older versions of iTunes can create conflict with normal Mac functions. Hence, Apple recommends installing the latest iTunes updates.

To install the latest iTunes, open iTunes. From the menu bar choose Help > Check for Updates and follow the prompts to install the latest version.

Now, check if your Mac recognizes the iPhone or not.

7. Disable antivirus on Mac

One of the reason cited for iPhone not detected by Mac is anti-virus or firewall protection on your system. So disable the antivirus or firewall and then try to connect your iPhone to Mac.

8. Enable iOS device in Mac Preferences

When iPhone is not showing on Mac Finder, check if your Mac Preferences allows to view iOS devices in Finder. To enable iOS device in Finder follow the below steps:

• Go to Finder > Preferences.
• Click on the Sidebar button in Finder Preferences box.
• Check in CDs, DVDs and iOS Devices.

_{Figure: Finder Preferences}

This should fix iPhone not showing up in Finder on Mac.

9. Connect iPhone to a different Mac machine

Try by connecting your iPhone to another Mac. If you receive a message asking to ‘Trust this computer’, click on ‘Trust’ to access your iPhone data on the new computer. Make sure to backup iPhone to avoid data loss situation.

Tip: Have you lost or accidentally deleted Camera Roll, Contacts, Photos Stream, Voice Memos, or more while transferring iPhone data to Mac? No need to worry. Restore the deleted photos, videos, messages, contacts, etc., with the help of an efficient Stellar Data Recovery for iPhone for Mac.

FAQ

1. Can I connect iPhone with Mac wirelessly?

You can sync your Mac and iPhone over the same Wi-Fi network.

1. Connect your iPhone to Mac using a USB cable.
2. Open Finder on Mac and select your iPhone in the sidebar.
3. Click on the General tab.
4. Check in Show this iPhone when on Wi-Fi.
5. Click Apply.

2. How to fix my iPhone cannot connect to iTunes?

If iPhone is not showing up in iTunes, restart your devices and ensure macOS, iTunes, and iOS are updated. To know more methods, read How fix iPhone unable to connect to iTunes problem.

3. How to connect iPhone to the latest MacBook Pro 2021 that doesn’t have USB A port?

The new MacBook has USB Type-C port. You can use USB-C to Lightning cable to connect iPhone XR, SE, 11, and above to the new MacBook. If you have iPhone X or below use USB-A to Lightning cable.

4. Can I use the methods to fix iPhone 14 not recognized by macOS Ventura?

Yes, you can apply the above methods to fix any iPhone not detected by macOS Ventura, Monterey, Big Sur, Catalina, or below.

5. Will I lose any data when syncing iPhone and Mac?

No, you won’t lose data by syncing iPhone to Mac. Syncing helps to access your iPhone data on Mac anytime from anywhere. However, if you accidentally delete iPhone data, use an iPhone Data Recovery software to restore it.

Wrapping Up

Syncing iOS device to macOS has so many advantages but if Mac is not recognizing your iPhone, you cannot transfer, back up, or access iPhone data on Mac. This post has shared 9 methods to fix the syncing issue of Mac and iPhone. One of them should resolve Mac not detecting your iPhone.

How to fix ‘Unable to load Video: An Error Occurred’

Summary: Are you facing ‘unable to load video’ error message while trying to play videos on iPhone or iPad? No worries. This post guides you how to fix the error and watch your videos on the iOS device without any issue.

‘I am frequently facing ‘unable to load video’ error message ever since iOS 16 update. Its annoying as I cannot watch videos on iPhone. How to fix the issue?’

‘Since I upgraded to iPhone14 Pro from iPhone 11, I have problem playing a few videos. It states ‘error loading video’. I even bought more iCloud storage but no luck. Please help.’

Videos not loading on iPhone or show ‘Unable to load video, an error occurred’ message is a persistent issue faced by iPhone users, even after successive iOS upgrades, irrespective of the iPhone model.

As the annoying error stops you from watching your favorite videos on iPhone, you want to fix it soon. But before that its’ important to understand what could be the cause of this ‘unable to load video’ error, to troubleshoot the problem accordingly.

Why iPhone shows unable to load videos error?

There is no single reason for video loading error. Usually, videos saved in iCloud would display unable to load error on iPhone, if the Internet is off or you have slow connection.

Another common reason behind videos not loading on iPhone is that the ‘optimize storage’ option is enabled on your iOS device. Apple offers this feature to save space on your iOS device and stores the full resolution videos to iCloud. However, this often results in the video loading problem on the device.

Its’ also possible that your iPhone has insufficient space, which prevents videos from loading. There could also be a bug that can be fixed with iPhone update.

Right 9 ways to Fix ‘Unable to load Video, an error occurred’ on iPhone, iPad

Method 1: Restart iPhone

Restart, also called soft reset can fix error in loading video on iPhone or iPad. Close all the applications and restart your iPhone or iPad.

Method 2: Turn on Internet of the iOS device

If you are watching YouTube, Netflix, or other online videos, ensure cellular data of your device is turned on. In case you are facing the error ‘unable to load video: an error occurred’ while loading a higher quality version of the video on iPhone, try by switching to uninterrupted Wi-Fi connection. Note that high speed Internet is necessary for streaming videos on iOS device.

Method 3: Update your iOS device

You can update the device to fix ‘unable to load video’ error on iPhone or iPad. To update your iPhone or iPad follow the given steps. Before that make sure Wi-Fi is turned on.

• Go to Settings > General > Software Update.
• Click Download and Install followed by Install Now.

Method 4: Turn off the Optimize Storage option

When ‘optimize storage’ option is enabled on your iOS device, all the full-resolution high quality videos and photos get saved in iCloud while only the compressed space-saving versions are on your iPhone.

Thus, when you try to open a video on the iOS device, it takes time eventually to load it from iCloud. While sometimes, the video may not load at all. Try to fix unable to load video on iPhone by turning off this feature. Here are steps to disable optimize storage’ option:

• Open Settings. Click on your name.
• Tap on iCloud > Photos.
• Below Optimize iPhone Storage, tap on Download and Keep Originals option.

Figure: Disable Optimise iPhone Storage Option

Wait until the iPhone downloads all the videos from iCloud. You should now be able to open videos without loading error.

Method 5: Update the app that shows video load error on iPhone

If the video loading issue error pops up in a particular app like YouTube, Instagram, then update the application. If the update doesn’t help, you can reinstall the app also. This should fix videos not loading error or buffering issues. App update are available in App Store. To update any iPhone app follow the given steps:

• Open the App Store.
• Now click on your profile icon on top.

Figure: Update app in App Store

• Scroll to find your app and click on the Update button next to it. You can also click on Update All on top.

Method 6: Create free space on your iPhone

High quality videos may not load and show error if there is no space on your iPhone. Check your iOS device, if it has enough free space. Its’ essential to have 2GB free space available in the device to play high quality and large size videos.

You can check the available space on your iPhone or iPad by navigating to: Settings > General > iPhone Storage.

Figure: iPhone storage screen

On the top right, you will see the amount of space used on your iOS device. If the space is less, remove the useless videos, photos, apps and other data on your iPhone or iPad.

Method 7: Access video from iCloud.com

If the videos don’t load on iPhone and show error, try to access them via iCloud.com on your computer by following the below steps:

• Open iCloud.com and enter Apple ID credentials to sign in.
• Click on the Photos or iCloud Drive app where the video is saved.
• Find your video and click on it to open.

There’s also the options in icloud.com to share the video via email or download to save it on your computer.

Method 8: Repair video not loading on iPhone

If you face ‘unable to load video’ an error occurred in Camera Roll videos of iPhone, the file may have corrupted.

Copy or transfer the problem video to your PC or Mac. Download and install a video repair software—Stellar Repair for Video . It can fix file corruption in the error throwing iPhone video. The software is compatible with MP4, MOV, HEVC, video files formats used in iPhone and iPad.

The software also offers a free trail wherein you can repair the corrupt video and watch its preview.

Method 9: Restore iPhone to factory settings

If ‘unable to load video’ error is perpetual on your iPhone or iPad, in spite of trying the above methods, then factory reset can be your last bet.

As all know, factory reset will delete everything on your iOS device , make sure you create the latest backup of the iPhone in iCloud or iTunes.

Follow the below steps to factory reset iPhone and fix unable to load video error:

• Open Settings > General > Reset.
• Click on Erase All Content and Settings.
• Enter Apple passcode. Click on Erase iPhone and follow the prompts.

Now check if the video error problem is resolved or not.

Wrapping Up & FAQ

Usually one of the methods shared in this post fixes the error – ‘unable to load video‘, an error occurred’ on iPhone. However, unfortunately if none works and you cannot play videos on iPhone, contact Apple support .

FAQ

1. Why does my iPhone say ‘an error occurred while loading a higher quality version of this photo’?

High quality photos/videos require more storage space to open. Less free storage is one of the for the media file loading error.

Hence, delete some useless photos, videos, or apps to free up space. Now you can open the high quality photo/video smoothly without any error.

2. Why my iPhone videos not playing on PC?

Your iPhone videos may not play on Windows PC due to many reasons— the media player doesn’t support videos file format; virus in your PC; or the video has turned corrupt during transfer. However, you can fix the problem and play iPhone videos on Windows .

3. Why I cannot view my video in icloud.com?

In iCloud.com, select the Photos app and click Photos. In the side bar, you will see the thumbnails of all your photos and videos. Find your video and click on it to view.

---

Also read: